SOFC ' s Interconnects Materials Development

P. Piccardo,R. Amendola

Abstract:A short history of interconnects in high and intermediate temperature solide oxide fuel cells form those based on ceramics to those made of metals.

Engineering,Materials Science

What problem does this paper attempt to address?

Progress of Interconnect Materials Used for SOFC

JIN Guang-xi,YANG Ying,WANG Li-nan,LANG Cheng,GAI Xiao-chen

DOI: https://doi.org/10.3969/j.issn.1007-2853.2007.02.022

2007-01-01

Abstract:The essential conditions and properties of interconnectors for the solid oxide fuel cell are introduced.Some problems of SOFC interconnectors under high temperature are summarized,and the development trends of some interconnectors are pointed out.At last,it is emphasized that the ferritic stainless steel containing rare earths and other trace elements is an important development orientation for the research of flat SOFC interconnectors.
Perspectives on the metallic interconnects for solid oxide fuel cells

Wei-zhong Zhu,Mi Yan

DOI: https://doi.org/10.1631/jzus.2004.1471

2004-12-01

Journal of Zhejiang University SCIENCE A

Abstract:The various stages and progress in the development of interconnect materials for solid oxide fuel cells (SOFCs) over the last two decades are reviewed. The criteria for the application of materials as interconnects are highlighted. Interconnects based on lanthanum chromite ceramics demonstrate many inherent drawbacks and therefore are only useful for SOFCs operating around 1000 °C. The advance in the research of anode-supported flat SOFCs facilitates the replacement of ceramic interconnects with metallic ones due to their significantly lowered working temperature. Besides, interconnects made of metals or alloys offer many advantages as compared to their ceramic counterpart. The oxidation response and thermal expansion behaviors of various prospective metallic interconnects are examined and evaluated. The minimization of contact resistance to achieve desired and reliable stack performance during their projected lifetime still remains a highly challenging issue with metallic interconnects. Inexpensive coating materials and techniques may play a key role in promoting the commercialization of SOFC stack whose interconnects are constructed of some current commercially available alloys. Alternatively, development of new metallic materials that are capable of forming stable oxide scales with sluggish growth rate and sufficient electrical conductivity is called for.

engineering, multidisciplinary,physics, applied
Ferritic Steel Interconnect Used in Solid Oxide Fuel Cell

WANG Zhong-li,HAN Min-fang,Chen Xin

DOI: https://doi.org/10.3969/j.issn.1002-8935.2006.04.016

2006-01-01

Abstract:Several interconnect materials used in SOFC were briefly summarized,and the effects of several main elements on ferritic steel interconnect were discussed in detail in this study.The characteristcs and development of ferritic steel interconnect were discussed,such as Crofer22 APU,SUS430,X10CrAl18 and ZMG232,then,the capability of several Fe-Cr alloys which were designed by author were given.The research and development orientation of the metal interconnect were given at last.
Metallic Interconnect Materials Used in Solid Oxide Fuel Cell

WANG Zhongli,HAN Minfang,CHEN Xin

DOI: https://doi.org/10.3969/j.issn.1006-6055.2007.01.005

2007-01-01

Abstract:The development of interconnect materials used in SOFC had been simply reviewed,and the metallic interconnect materials was introduced in detail in this paper.Now,three kinds of alloys were studied and applied:Cr-former alloy,Ni-based alloy and the ferritic steel.The highest applied temperature of Cr-former alloy is possible for SOFCs,and the oxide Cr2O3 formed on the alloy has an accepted electrical conductivity,but the cathode could be easily poisoned by Cr volatilizing from the alloy substrate.Ni-based alloy has a good oxide resistance,but its thermal expansion coefficient(TEC)is much larger than the electrolyte(e.g.,YSZ),which would easily induce the fracture of the cell itself.The strength character and the TEC of the ferritic steel fit the requirement of SOFCs,while a protecting coating must be made to decrease the rate of oxidation and Cr volatilization.In this paper,the characters of the three kinds alloy had been summarized,and some of the author's work had been presented,then the development orientation of the metal interconnect was given.
Lifetime Issues for Solid Oxide Fuel Cell Interconnects

Manuel Bianco,Markus Linder,Yngve Larring,Fabio Greco,Jan Van herle

DOI: https://doi.org/10.1016/b978-0-08-101102-7.00007-6

2017-01-01

Abstract:The manuscript aims to introduce the reader to the main drawbacks interconnects face in SOFC environments, giving the basis to understand the problem and the literature references to deepen the knowledge on each specific topic.The chapter is divided in two parts: a theoretical description of the degradation phenomena affecting the interconnects (notably corrosion and mechanical stresses) and a table presenting its behaviour in operating conditions, at the end of the chapter. In the first part, influence of oxygen, fuel and water partial pressure on scale growth process are taken in consideration, with the latter being the most influent. A paragraph is dedicated to the corrosion behaviour of sealants too, while the mechanical degradation part is focused on the model methodology currently used to forecast stress-strain behaviour in SOFC metal interconnects. A paragraph describing solutions to mitigate interconnect lifetime issues is provided at the end of this section. In the table are presented results of interconnects coupled with different types of SOFC cell: anode, electrolyte and metal supported and tested in operating conditions. From the analysis of the data collected in the table, it can be said that current solutions to extend lifetime are already reasonably effective
CHAPTER 6 Development of SOFC Interconnect Stainless Steels

Sébastien Chevalier,Lionel Combemale,Ioana Popa,Somrerk Chandra-Ambhorn,Walairat Chandra-ambhorn,Piyorose Promdirek,Patthranit Wongpromrat,Somrerk Chandra-ambhorn

DOI: https://doi.org/10.4028/www.scientific.net/SSP.300.135

2020-02-12

Solid State Phenomena

Abstract:The chapter introduces components and working principle of solid oxide fuel cells (SOFCs). It is followed by the explanation on the choices of materials focussing on ferritic stainless steels. The review is further made on the required properties of these steels, i.e. low oxidation rate, low chromium species volatilisation rate, high electrical conductivity and good scale adhesion. For the oxidation aspect, the behaviour of stainless steel interconnect in cathode, anode (hydrogen and biogas), and dual atmospheres are described. Surface modification by pre-oxidation and coatings to improve the oxide electrical conductivity and to reduce chromium species volatilisation is finally reviewed.

English Else
Protective/Conductive Coatings on Ferritic Stainless Steels for Solid Oxide Fuel Cell Interconnect Applications

CHEN Jianlin,CHEN Jian,HE Jianjun,REN Yanjie,QIU Wei,ZHOU Pengzhan

DOI: https://doi.org/10.3969/j.issn.1005-023x.2012.01.029

2012-01-01

Abstract:Ferritic stainless steels have become the standard material for intermediate solid oxide fuel cells(IT-SOFC) interconnect applications due to their specific advantageous properties.The functions,the performance requirements and the materials for interconnects are summarized according to SOFC operating environments.The mec-hanism,the main coating technologies and the research progress of protective/conductive coatings,which include four types such as reactive element oxide,rare earth perovskite,spinel and MAlCrYO,on ferritic stainless steels for SOFC interconnects are discussed with emphasis.
A novel interconnector design of SOFC

Wei Kong,Zhen Han,Siyu Lu,Xiang Gao,Xiaorong Wang

DOI: https://doi.org/10.1016/j.ijhydene.2019.10.252

IF: 7.2

2020-08-01

International Journal of Hydrogen Energy

Abstract:<p>In this study, a novel interconnector design is proposed, which is named as the X-type interconnector. The solid oxide fuel cell (SOFC) models are established for the conventional interconnector and the X-type interconnector. The results indicate that the design of the X-type interconnector is beneficial to the transport of gas in SOFC, which has a higher oxygen concentration under rib than that of the conventional interconnector. Furthermore, compared with the X-type interconnector, the potential difference in cathode is larger for the conventional interconnector, which indicates that the X-type interconnector reduces the current path and improves the performance of SOFC. For any porosity and conductivity of anode and cathode, the X-type interconnector is superior to the conventional interconnector. Moreover, when the cathode conductivity is smaller, the advantage of the X-type interconnector becomes more remarkable.</p>

energy & fuels,electrochemistry,chemistry, physical
Research Progresses in the Preparation of Spinel Coatings on the Surface of SOFC Ferrite Stainless Steel Interconnectors

Jia Deng,Yunyi Li,Wei Tong,Jianli Song

DOI: https://doi.org/10.1109/iaecst54258.2021.9695666

2021-12-10

Abstract:As one of the important components of solid oxide fuel cell (SOFC), interconnector mainly plays the role of supporting connecting circuit and isolating fuel gas and oxidation gas. At present, with the development of SOFC to medium and low operation temperatures (600-800°C), ferritic stainless steel (FSS) has become the most potential SOFC interconnector material because of its excellent electric and heat conductivity, easy processing, good coefficient of thermal expansion (CTE) compatibility with other components and low price. However, in the SOFC working environment, FSS will produce Cr volatile chemical compounds, resulting in "Cr poisoning" of the cathode and performance degradation of the cell, which restricts the commercial application of SOFC. Spinel protective coating on the surface of FSS can effectively inhibit the volatilization of Cr compounds and improve the oxidation resistance of FSS interconnectors. Therefore, the development and preparation of spinel coating on the surface of FSS connectors has become a research hotspot in this field. In this paper, the materials of spinel coating commonly used on the surface of FSS interconnector are summarized, the main preparation methods, characteristics and research progresses on spinel coatings are reviewed, and the future development trends in this field are also proposed.
Test and Modelling of Solid Oxide Fuel Cell Durability: A Focus on Interconnect Role on Global Degradation

Roberto Spotorno,Fiammetta Rita Bianchi,Daniele Paravidino,Barbara Bosio,Paolo Piccardo

DOI: https://doi.org/10.3390/en15082762

IF: 3.2

2022-04-09

Energies

Abstract:High-temperature fuel cells are a promising technology due to their high energy efficiency and low environmental impacts compared to conventional engines. Nevertheless, they have a limited lifetime which reduces the use to a few application fields. Among them, Solid Oxide Fuel Cells (SOFCs) have had a recent development at the industrial level in two possible configurations: anode- and electrolyte-supported design. Considering the impossibility to experimentally distinguish the effects of every degradation mechanism on global cell performance, each layer should be tested singularly through ex situ tests and then assembled into a virgin cell to evaluate its role on the whole system by in situ tests. However, this procedure results as quite complex, and some further microstructural changes could occur during cell sintering. In order to overcome these constraints, the proposed approach paired ex situ experimental observations on a single element with modelling results on global SOFC. As a case study, CoMnO/Crofer22 APU and CuMnO/AISI 441 interconnect samples were tested, measuring their resistance variation for some hundreds of hours, followed by a detailed post-mortem microstructural analysis. Based on a previously validated local model, SIMFC (SIMulation of Fuel Cells), the durability of commercial anode- and electrolyte-supported cells was simulated, adding specific degradation functions only for the interconnects in order to highlight their influence on SOFC performance.

energy & fuels
Characterization of Metallic Interconnects Extracted from Solid Oxide Fuel Cell Stacks Operated up to 20,000 h in Real Life Conditions: The Air Side

Giorgia Ghiara,Paolo Piccardo,Valeria Bongiorno,Christian Geipel,Roberto Spotorno

DOI: https://doi.org/10.3390/en13246487

IF: 3.2

2020-12-08

Energies

Abstract:Metallic interconnects represent the main component of a solid oxide fuel cell (SOFC) stack in terms of weight and volume. They are typically made of ferritic stainless steel (FSS) coated on the air side. At the stack operating conditions, the interconnect is exposed to a dual atmosphere: air at the cathode side; fuel (a hydrogen-rich mixture) at the anode side. The stacks considered in this study were field operated in reformed natural gas for 5000, 9000 and 20,000 h respectively. The analyzed interconnects are made from CROFER22APU and coated on the air side with Co-Mn base spinel. One interconnect has been studied for each stack by sampling and preparing cross section the inlet and outlet positions. The samples were characterized by SEM-EDXS in order to investigate the evolution of the interconnect at the air side. The interaction between the metal substrate and the coating is investigated highlighting the formation of chromia based thermal grown oxide (at the FSS/coating interface) and the solid-state diffusion of Cr and Fe from the metal into the coating. The microstructural features evolving as a function of time are also quantified.

energy & fuels
Solid Oxide Fuel Cells: Past, Present and Future

Subhash C. Singhal

DOI: https://doi.org/10.1007/978-1-4471-4456-4_1

2012-11-02

Abstract:Although fuel cells have been known for over 150 years, research on solid oxide fuel cells (SOFCs) based on an oxide ion conducting electrolyte only accelerated in the last 30 years. This chapter, after a brief history of SOFCs, reviews the materials for different cell components (electrolyte and the two electrodes) and cell stacks (seals and interconnects); novel materials and their structures have been investigated and developed to improve electrochemical performance. Different SOFC designs and their relative advantages and disadvantages are then discussed. Finally, various applications of SOFC power systems and the status of their demonstration and commercialization are reviewed.
Novel Ti–Si–C composites for SOFC interconnect materials: Production optimization

Serhii Tkachenko,Dmytro Brodnikovskyi,Jan Cizek,Pavel Komarov,Yehor Brodnikovskyi,Yaroslav Tymoshenko,Štefan Csáki,Mykyta Pinchuk,Oleksandr Vasylyev,Ladislav Čelko,Mykola Gadzyra,Tomáš Chráska

DOI: https://doi.org/10.1016/j.ceramint.2022.06.081

IF: 5.532

2022-10-01

Ceramics International

Abstract:This paper presents a first part of research of designing a new Ti–Si–C-based composite for potential application as a solid oxide fuel cells interconnect material. Spark plasma sintering technique was used for the production and the effects of sintering parameters on microstructure, phase composition, as well as mechanical and electrical properties were investigated. Optimization of the sintering conditions then allowed to obtain a fine-grained material with properties (bending strength 433 MPa, hardness of 9.6 GPa, electrical resistance 26 mΩ cm) surpassing those of Crofer steels, materials typically used in the SOFC interconnect applications nowadays. This is a very promising result, yielding our Ti–Si–C composite a serious candidate for new-generation lightweight interconnect materials.

materials science, ceramics
Development of Coating Materials on Alloy Interconnect in Solid Oxide Fuel Cell

韩敏芳,李震,杜晓佳,陈鑫

DOI: https://doi.org/10.3321/j.issn:1002-185X.2009.z2.189

2009-01-01

Rare Metal Materials and Engineering

Abstract:It is possible for Solid Oxide Fuel Cell (SOFC) to use the alloy as interconnect due to that the SOFC's operation temperature lowers to the middle temperature of 600 similar to 800 degrees C. In order to prolong the life of alloy in the SOFC operating condition, e.g. high-temperature oxidation and humid hydrogen, it is necessary to coat the protect layers. The perovskite and spinel oxide are usually optimized as the coating materials on alloys. It is important to deposite dense oxides of coatings on the surface of metallic alloy, which could decrease the oxidation rate of alloys and reduce the poison of Cr to cathode by reacting with Cr that vaporizes from the alloys. The high electrical conductivity of the coating materials is required to lower the interlayer resistance, and the thermal expansion coefficient (TEC) of it should match that of alloys in order to prevent the coating layer from falling off. Up to now, there are not the optimized coating materials to satisfy the above properties. Therefore, the research works should be continued in the areas.
Progress in SOFC Metallic Interconnect Coating

Xiaojia Du,Minfang Han,Zaihong Sun

DOI: https://doi.org/10.1149/05701.2271ecst

2013-01-01

ECS Transactions

Abstract:Thin film coating is an effective way to enhance the anti-oxidation property of SOFC metallic interconnect at high temperatures and suppress chromia evaporation from stainless steel which easily causes cathode poisoning at cathode-electrolyte interface. The coating materials are mostly metal oxides and coating technologies are chosen to achieve dense films at low temperatures. In this paper, the SOFC interconnect coating materials and coating technologies developed in recent years are summarized, the effects of such coatings on SOFC stack performance are analyzed, and further development of SOFC interconnect coating is discussed.
Mechanical reliability and life prediction of coated metallic interconnects within solid oxide fuel cells

Zhijie Xu,Wei Xu,Elizabeth Stephens,Brian Koeppel

DOI: https://doi.org/10.1016/j.renene.2017.06.103

IF: 8.7

2017-12-01

Renewable Energy

Abstract:Metallic cell interconnects (IC) made of ferritic stainless steels, i.e., iron-based alloys, have been increasingly favored in the recent development of planar solid oxide fuel cells (SOFCs) because of their advantages in excellent imperviousness, low electrical resistance, ease in fabrication, and cost effectiveness. Typical SOFC operating conditions inevitably lead to the formation of oxide scales on the surface of ferritic stainless steel, which could cause delamination, buckling, and spallation resulting from the mismatch of the coefficient of thermal expansion and eventually reduce the lifetime of the interconnect components. Various protective coating techniques have been applied to alleviate these drawbacks. In the present work, a fracture-mechanics-based quantitative modeling framework has been established to predict the mechanical reliability and lifetime of the spinel-coated, surface-modified specimens under an isothermal cooling cycle. Analytical solutions have been formulated to evaluate the scale/substrate interfacial strength and determine the critical oxide thickness in terms of a variety of design factors, such as coating thickness, material properties, and uncertainties. The findings then are correlated with the experimentally measured oxide scale growth kinetics to quantify the predicted lifetime of the metallic interconnects.

energy & fuels,green & sustainable science & technology
Discussion on some problems about the study of metallic interconnect for SOFC

Guang-xi JIN,ying YANG,Zuo-jun MA,Jian-yu SUN

DOI: https://doi.org/10.3969/j.issn.1007-2853.2008.03.023

2008-01-01

Abstract:Based on the study of metallic interconnect Fe-Cr-Mn alloy for solid oxide fuel cell(SOFC),some problems existing in the theoretical and experimental test of area specific resistance,and XRD analysis of oxide scale on the alloy surface are researched.The correct equation of area specific resistance is derived,and the structure of oxide scale on the surface of alloy is studied further.
A High Performance Interconnecting Ceramics for Solid Oxide Fuel Cells (Sofcs)

Xiao-Liang Zhou,Jian-Jun Ma,Fei-Jun Deng,Guang-Yao Meng,Xing-Qin Liu

DOI: https://doi.org/10.1016/j.ssi.2006.10.007

IF: 3.699

2007-01-01

Solid State Ionics

Abstract:In order to improve the electrical conductivity and sintering capability of doped lanthanum chromite, the well-known interconnecting ceramic for solid oxide fuel cells (SOFCs), the composite material system La0.7Ca0.3CrO3-delta (LCC)+x wt-%Sm0.2Ce0.8O1.9 (SDC) (x=0-10) has been investigated. The high sintering activity LCC and SDC powders used in this study were prepared by an auto-ignition process and the composite materials were made by pressing the mixture of LCC and SDC powders and then firing. The relative density of pellets sintered at 1400 degrees C for 4 h in air was 97.4% for only LCC powder and increased with the increase of SDC content, reaching 98.7% when the SDC content was up to 10%. The electrical conductivity of the samples dramatically increased with SDC addition and reached maximal value of 687.81 S cm(-1) in air at 800 degrees C for the sample with 5% SDC content, which is 38.7 times higher than that of pure LCC (17.77 S cm(-1)). The conductivity in pure H, at 800 degrees C was 3.57 S cm(-1), which is also higher than the pure LCC ceramics (2.5 S cm(-1)). The average thermal expansion coefficient (TEC) at 30-1000 degrees C in air increased slightly with SDC content, ranging from 11.12 x 10(-6) K-1 to 12.46 x 10(-6) K-1. We assume that there is negligible oxygen ion conduction. Such an assumption makes us state that it is still an electronically conducting ceramic. The above results demonstrate that it is a very promising interconnect material for intermediate temperature SOFCs. (c) 2006 Elsevier B.V. All rights reserved.
Interface Design Development for High Durability of SOFC Interconnectors Using Electrodeposition Coating

Takayuki Nakao,Tadashi Saito,Shigefumi Nishimura,Zenzo Tsukamoto,Tetsuro Fujimoto,Shuichi Inoue

DOI: https://doi.org/10.1149/11106.2215ecst

2023-05-19

ECS Transactions

Abstract:Solid Oxide fuel cell (SOFC) mounted in ENE-FARM type S has been commercialized since 2012. For further market expansion of ENE-FARM type, higher efficiency, higher durability, and lower cost of SOFC stacks are required. A key technology to advance its performance is a coating on SOFC metallic interconnector for the long-term durability of SOFC stacks. We achieved significant reduction in resistance and improved durability by improving the highly mass producible electrodeposition coating method. In this research, the coating technology of the SOFC interconnector has been developed. Long-term durability was confirmed through high-temperature acceleration evaluation, and the electrodeposition coating on the SOFC interconnector was installed in the ENE-FARM type S.
Optimized design of planar solid oxide fuel cell interconnectors

Boxiang Sun,Huiyu Wang,Songyan Zou,Xiang Shao

DOI: https://doi.org/10.1371/journal.pone.0298277

IF: 3.7

2024-07-03

PLoS ONE

Abstract:Solid oxide fuel cells (SOFCs) are vital for alternative energy, powering motors effi-ciently. They offer fuel versatility and waste heat recovery, making them ideal for various applications. Optimizing interconnector structures is crucial for SOFC advancement. This paper introduces a novel 2D simulation model for interconnector SOFCs, aiming to enhance their performance. We initially construct a single half-cell model for a conventional interconnector SOFC, ensuring model accuracy. Subsequently, we propose an innovative interconnector SOFC model, which outperforms the conventional counterpart in various aspects.

SOFC ' s Interconnects Materials Development

Progress of Interconnect Materials Used for SOFC

Perspectives on the metallic interconnects for solid oxide fuel cells

Ferritic Steel Interconnect Used in Solid Oxide Fuel Cell

Metallic Interconnect Materials Used in Solid Oxide Fuel Cell

Lifetime Issues for Solid Oxide Fuel Cell Interconnects

CHAPTER 6 Development of SOFC Interconnect Stainless Steels

Protective/Conductive Coatings on Ferritic Stainless Steels for Solid Oxide Fuel Cell Interconnect Applications

A novel interconnector design of SOFC

Research Progresses in the Preparation of Spinel Coatings on the Surface of SOFC Ferrite Stainless Steel Interconnectors

Test and Modelling of Solid Oxide Fuel Cell Durability: A Focus on Interconnect Role on Global Degradation

Characterization of Metallic Interconnects Extracted from Solid Oxide Fuel Cell Stacks Operated up to 20,000 h in Real Life Conditions: The Air Side

Solid Oxide Fuel Cells: Past, Present and Future

Novel Ti–Si–C composites for SOFC interconnect materials: Production optimization

Development of Coating Materials on Alloy Interconnect in Solid Oxide Fuel Cell

Progress in SOFC Metallic Interconnect Coating

Mechanical reliability and life prediction of coated metallic interconnects within solid oxide fuel cells

Discussion on some problems about the study of metallic interconnect for SOFC

A High Performance Interconnecting Ceramics for Solid Oxide Fuel Cells (Sofcs)

Interface Design Development for High Durability of SOFC Interconnectors Using Electrodeposition Coating

Optimized design of planar solid oxide fuel cell interconnectors