Abstract:: ENE-FARM type S equipped with solid oxide fuel cell (SOFC) stack has been commercialized since 2012. To further expand the market of ENE-FARM type S, higher electrical efficiency, higher durability, and lower cost of SOFC stack are required. A coating on a SOFC metallic interconnector is the key technology for the long-term durability of SOFC. In this research, we achieved a significant reduction in resistance and improved durability by improving the highly mass-producible electrodeposition coating method, one of the ceramic coating methods for the SOFC metallic interconnector. Furthermore, the cost of metallic interconnector has been reduced using commodity stainless steel due to its high durability. The SOFC stack of the 2016 model equipped with the electrodeposition coating on the commodity ferritic stainless steel had higher performance and durability than the 2012 model, even if the current density was increased approximately 1.5 times. The electrodeposition coating on commodity ferritic stainless steel has been commercialized and installed in the 2016 and 2020 models of ENE-FARM type S. electrodeposition the electrodeposition the SOFC interconnector coating. specimen was synthesized via conventional solid-state reaction. Specimens were obtained from a mixture of raw powders of ZnO, Mn 2 O 3 , and Co 3 O 4 . Finally, powders were pressed into a rectangular shape before sintering at 1273 K for 2 h in air. The specimens obtained were characterized using a four-probe DC conductivity measurement at 873–1073 K in air. Figure shows the total electrical conductivity of ZnMn x Co 2- x O 4 ( x = 0.0–2.0) specimens functions of Mn and Co The electrical 1.0. ZnMn x Co 2- x O ratio 1/1. Co 2- x O 4 x = 0.0–2.0)

Interface Design Development for High Durability of SOFC Interconnectors Using Electrodeposition Coating

Technical Development of The Electrochemical Society of Japan (Tanahashi Award) Development of Electrodeposition Coating for SOFC Interconnector

Progress in SOFC Metallic Interconnect Coating

Development and Application of HVOF Sprayed Spinel Protective Coating for SOFC Interconnects

A review on the solid oxide fuel cells (SOFCs) interconnect coating quality on electrophoretic deposition (EPD) processing parameters

Development of Coating Materials on Alloy Interconnect in Solid Oxide Fuel Cell

Ni–Co/ZrO2 Composite Coatings via Electroless Plating on Crofer 22APU for SOFC Interconnect Applications: Oxidation and Chromium Vaporization Behavior

Protective coating based on manganese–copper oxide for solid oxide fuel cell interconnects: Plasma spray coating and performance evaluation

Influence of Electrophoretic Deposition (EPD) Voltage on SOFC Interconnect Morphology

Mechanical reliability and life prediction of coated metallic interconnects within solid oxide fuel cells

Dense Mn1.5Co1.5O4 coatings with excellent long-term stability and electrical performance under the SOFC cathode environment

Metallic interconnects for solid oxide fuel cell: Performance of reactive element oxide coating during long time exposure

Supersonic spray derived Cu–Co oxide coating on SUS441 to protect the metallic interconnect and to increase stability of SOFC cathode

Effect of Rare Earth Y and Metal X (Co, Mn, Ni, Cu) Elements on Cr Diffusion Behavior of SOFC Metallic Interconnect

Influences of Composite Electrodeposition Parameters on the Properties of Ni-Doped Co-Mn Composite Spinel Coatings

Progress of Interconnect Materials Used for Solid Oxide Fuel Cell

High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects

Effect of MnCoNiFeCu Alloy on Oxidation Behavior and Electrical Performance of AISI 441 for SOFC Interconnect Application

Progress of Interconnect Materials Used for SOFC

Protective/Conductive Coatings on Ferritic Stainless Steels for Solid Oxide Fuel Cell Interconnect Applications

Preparation of a nickel-cobalt-zinc alloy coating as SOFC connection material in deep eutectic solvent