Abstract:Hastelloy X (HX) is used in a wide range of aerospace applications due to its excellent high-temperature properties, Dynamic strain aging (DSA) and Dynamic recrystallization (DRX) are of great interest as they affect the mechanical behavior at high temperatures. In this study, the serrated flow behavior of highly textured Hastelloy X fabricated by laser powder bed fusion (LPBF) is investigated during uniaxial straining over a wide range of temperatures (20–800 °C) and strain rates (5×10 −2 s −1 to 5×10 −4 s −1 ). The alloy exhibits different types of tensile serrated flow in the temperature range of 200–600 °C. The alloy has been shown to have a very good tensile flow behavior. The presence of the Portevin-Le Chatelier effect (PLC) due to dynamic strain failure was observed at temperatures lower than 600 °C, respectively, with an average activation energy value of 45 kJ/mol calculated using the quasi-static aging (McCormick) model, and an average activation energy value calculated using the solute resistance (Cottrell) model of 41.8 kJ/mol, which is significantly lower than the 80–130 kJ/mol of conventionally fabricated HX. The effects of temperature and strain rate on fracture morphology and microstructure were analyzed by SEM, and the dynamic recrystallization behavior and nucleation mechanism were characterized by electron backscatter diffraction (EBSD). The changes in the content of recrystallized texture Cube and deformed texture Goss at different deformation temperatures are explained, and the dynamic recrystallization mode changes, from continuous dynamic recrystallization (CDRX) to discontinuous dynamic recrystallization (DDRX) as the deformation temperature increase. Verification of the different DRX mechanisms contributes to a comprehensive understanding of the microstructural evolution of the hot deformation of HX fabricated by LPBF.

Fracture behaviour of Hastelloy X elaborated by laser powder bed fusion: influence of microstructure and building direction

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion

Investigating the deformation and microstructural evolution of laser powder-bed fusion of Hastelloy X during high temperature fatigue loading

Investigation of deformation mechanisms in Hastelloy X superalloy manufactured via laser powder-bed fusion: Insights into effects of carbides and cellular structure at elevated temperatures

Hot-Cracking Mitigation and Microcrack Formation Mechanisms in Laser Powder Bed Fusion Processed Hastelloy X and Cantor High Entropy Alloys

Microstructural evolution and cracking behavior of Hastelloy X superalloy fabricated by laser directed energy deposition

High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects

Effect of the scanning strategy on microstructure and mechanical anisotropy of Hastelloy X superalloy produced by Laser Powder Bed Fusion

Fatigue crack growth in additively manufactured Hastelloy X - Influences of crack orientation and post-fabrication treatments

Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion

Laser powder bed fusion of WC-reinforced Hastelloy-X composite: microstructure and mechanical properties

High-Temperature Tensile Properties of Hastelloy X Produced by Laser Powder Bed Fusion with Different Heat Treatments

Mechanical properties of Hastelloy X produced by laser powder bed fusion and affected by spatter redeposition

The anisotropic oxidation behavior of Hastelloy X alloy fabricated by laser powder-bed fusion (LPBF) during the cyclic oxidation process

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

Effect of Laser Energy Density on the Microstructure and Texture Evolution of Hastelloy-X Alloy Fabricated by Laser Powder Bed Fusion

Micro-cracking, microstructure and mechanical properties of Hastelloy-X alloy printed by laser powder bed fusion: As-built, annealed and hot-isostatic pressed

Dynamic strain aging and recrystallization mechanisms in laser powder bed melt printing of highly textured Hastelloy X

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Tailoring the microstructure and mechanical properties for Hastelloy X alloy by laser powder bed fusion via scanning strategy