Abstract:Comprehensive investigations into Cu–ZnO (nano) and Cu–TiN (nano) copper-based materials by standard methods in combination with metallographic and electron microscopy investigations using energy-dispersive and thermal analyses make it possible to identify stable correlation relations between the content of nanoparticle additives, microstructural parameters, and mechanical-and-physical properties of pseudoalloys. Process procedures of increasing the distribution uniformity of modifying additives of ZnO and TiN nanoparticles over the pseudoalloy bulk excluding their conglomeration are developed and substantiated. Novel original methods of nanoparticle introducing into a matrix material in the form of a master alloy made of Cu–Al–ZnO or copper powders coated with TiN nanoparticles are proposed. A high specific surface and reactivity of nanopowders make it possible to lower the ceramic phase in electrocontact materials (down to 2.0–3.0% instead of 10–15% when compared with known commercial brands). This results in the conservation of the main properties characteristic of the matrix material (copper) such as thermal and electrical conductivity at a rather high level, while the general level of physicomechanical characteristics (hardness, strength, and wear resistance) and operational properties of composite pseudoalloys simultaneously increases. The main characteristics of copper-based composite materials are as follows: electrical resistance (ρ = 0.025 μΩ m), bonding strength to the contact support material (σ ~ 2 MPa), and dispersed ceramic phase inclusions. They reduce the electroerosive wear (up to a factor of 2.5) when compared with conventional materials.

Production of Copper Powders by Alternating Current Polarization of a Copper–Titanium Electrode Pair

A Catalytic Oxidation Approach to Coat Copper Powder with Polyaniline

Preparation of fine copper powders by galvanostatic regime of electrolysis of copper scrap in a cylindrical electrochemical cell

Production of Fine Copper Powder Based on the Theory on Preparation of Monodispersed Particles. Production of fine copper powder by disproportionation reaction of cuprous sulfate solution (2nd Report).

Using design of experiments in synthesis of ultra-fine copper particles by electrolysis

ELECTROCHEMICAL BEHAVIOR OF SILVER IN A POTASSIUM FERROCYANIDE SOLUTION

Investigation into the Peculiarities of Structure Formation and Properties of Copper-Based Powder Pseudoalloys Modified by ZnO and TiN Nanoparticle Additives

Electrochemical oxidation of Ce(III) to Ce(IV) and deposition of copper powder in an electrolytic membrane reactor

A new Co-doped PbO 2 anode for copper electrowinning: Electrochemical and morphological characterization

High Purity Copper Nanoparticles Via Sonoelectrochemical Approach

Effect of electrode material, electrolyte composition, and surfactant on electrochemical synthesis of copper nanoparticles

Lithium insertion in naturally surface-oxidized copper

Preparation Of Ultra-Fine Copper Powder And Its Application In Manufacturing Conductive Lines By Printed Electronics Technology

A novel strategy to electrodeposit high-quality copper foils using composite additive and pulse superimposed on direct current

Compact metal nano-powder generator of 273 MW average power and synthesis of copper nano-powder

Preparation and Application of Ultrafine Copper Powder

Atomic Editing Copper Twin Boundary for Precision CO2 Reduction

Preparation of highly (111) textured nanotwinned copper by medium-frequency pulsed electrodeposition in an additive-free electrolyte

Achieving Optimal Dendritic Morphology in Ultralight Copper Powder Production through Hydrochloric Acid Intervention

Modulation of Interfacial Characteristics of Copper Electrode by Electrodeposited Cu@Ti for High-Performance Anode-Free Zinc Ion Batteries

Experimental Study of Zinc Powder Preparation by Electrochemical Method