Abstract:The aqueous zinc-ion batteries (ZIBs) have been considered as a promising energy storage device. However, the ion transfer at the Zn metal anode–electrolyte interface is limited by the sluggish kinetics resulting in high interface resistance. Herein, mesoporous TiO2 (m-TiO2) is coated on the Zn foil (Zn-TiO2) driving the ion's faster transfer to reduce interface resistance (70.1 Ω vs 799.3 Ω of bare Zn). The lower interface resistance is ascribed to shortening the ion transfer path provided by the mesoporous structure and the smaller Zn2+ absorption energy barrier of the surface of the Zn-TiO2 anode as well as the unobstructed ion transfer path at the crystal planes (100) of TiO2, which have been supported by the density functional theory (DFT) calculation and experiments. Therefore, the Zn-TiO2 anodes in the symmetrical cells display a low voltage hysteresis (36.5 mV) and long-term cycling stability (500 h at 4.4 mA cm–2). Especially, the Zn-TiO2/MnO2 full cells show superior cycling performance with a high capacity of 269.8 mAh g–1 after 50 cycles at 0.2 A g–1 and 210.9 mAh g–1 after 1000 cycles at 0.5 A g–1. The analysis of ion-transfer kinetics at the interface provides deep enlightenment and reference for the study of the metal anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18433?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18433</a>.The SEM image of the Zn-20TiO2 surface; cross-section SEM images and galvanostatic cycling curves; galvanostatic cycling performance of symmetric cells; partial enlarged galvanostatic cycling curves of symmetrical cells; the SEM images and surface pictures; nucleation overpotential; the contact angle; calculation models of Zn absorbed on the surfaces; the XPS spectrum; the XRD results; the TEM results; nitrogen adsorption/desorption isotherms; the XRD patterns of MnO2; the discharge/charge curves; the long cycling performance at 1 A g–1; the SEM image of TiO2 after cycling; the TEM image of m-TiO2 after cycling; the cycling performance using a 2 M ZnSO4 electrolyte; the images of the separator; the linear relationships between Zre and ω–0.5; GITT and diffusion coefficient curves of full cells; cyclic voltammetry curves; SEM images of the electrode after cycling; comparison of cycling performance in the symmetrical cell; and comparison of charge transfer impedance in the symmetrical cell (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18433/suppl_file/am0c18433_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Modulation of Interfacial Characteristics of Copper Electrode by Electrodeposited Cu@Ti for High-Performance Anode-Free Zinc Ion Batteries

Preparation of Nano-copper Modified Three-dimensional Zinc Mesh Electrode and Its Performance as Anode for Zinc-ion Batteries

Dispersed Zn Nucleation and Growth Induced by Functional Nano-TiO2 Particles for a Stable Zn Metal Anode

An Artificial Interphase Engineering Simultaneously Suppressing Hydrogen Evolution Reaction and Controlling Zinc Dendrite Growth to Achieve Stable Zinc Metal Anodes

Heterostructured Interface Enables Uniform Zinc Deposition for High‐Performance Zinc‐Ion Batteries

Highly Reversible Zinc Electrodeposition Enabled by Glutathione-Protected Copper Nanoclusters for Aqueous Zn-Ion Batteries

Interface Engineering via Ti3C2Tx MXene Electrolyte Additive toward Dendrite-Free Zinc Deposition

High‐Index Zinc Facet Exposure Induced by Preferentially Orientated Substrate for Dendrite‐Free Zinc Anode

Driving the Interfacial Ion-Transfer Kinetics by Mesoporous TiO 2 Spheres for High-Performance Aqueous Zn-Ion Batteries

N-Doped Ti3C2Tx Interfacial Layer Enabling Uniform Zn Deposition along (002) Plane for Stable Aqueous Zinc-Ion Battery

Multicomponent Copper-Zinc Alloy Layer Enabling Ultra-Stable Zinc Metal Anode of Aqueous Zn-ion Battery.

Cu‐Modified Ti3C2Cl2 MXene with Zincophilic and Hydrophobic Characteristics as a Protective Coating for Highly Stable Zn Anode

Scalable and Controllable Synthesis of Interface-Engineered Nanoporous Host for Dendrite-Free and High Rate Zinc Metal Batteries

Anodic Performance of Mesoporous Tio2-C Composites with Cu Nanopaticles Embedded for Lithium Ion Battery

Ultra‐Stable Zinc Metal Anodes Enabled by Uniform Zn Deposition on A Preferential Crystal Plane

Construction of Interfacial Electrolyte Sieve and Fast Zinc-Conductive Channels for High-Performance Zinc Metal Anodes

Understanding the Role of Titanium Metal-Organic Framework Nanosheets in Modulating Anode Chemistry for Aqueous Zinc-Ion Batteries

Regulated Ion/Electron-Conducting Interphase Enables Stable Zinc-Metal Anodes for Aqueous Zinc-Ions Batteries

Ultrathin surface coating of conductive and zincophilic titanium oxynitride enables stable zinc anodes for aqueous zinc-ion batteries

Morphology-tunable synthesis of CuO modified with Cu-Zn/Cu-Sn intermetallic compounds as high-performance anode for lithium-ion batteries

Influence of MXene-assisted multifunctional interface on zinc deposition toward highly reversible dendrite-free zinc anodes