Abstract:Aqueous Zn batteries are emerging as promising energy storage devices. However, severe dendrite growth and side reactions of Zn anodes restrict their further development. Herein, we develop a nucleophilic interfacial layer (NIL) on Zn to achieve a highly stable Zn anode for rechargeable Zn batteries. The NIL in a composition of zinc acetate acetamide is homogeneous, compact, and Zn2+-conductive, rendering dendrite-free Zn deposition, which is observed by in situ optical microscopy. Benefiting from the advantages of NIL, the Zn||Zn symmetric cells show a low overpotential of 0.12 V at a high current density of 40 mA/cm2, enhanced Coulombic efficiency up to 99.9%, and extended lifespan over 2600 cycles. The Zn||Ti asymmetric cells exhibit a high areal capacity of 5 mAh/cm2. Moreover, the NIL functionalized Zn anode enables stable cycling of both anode-free Zn||Cl2 cells and zinc-ion capacitors, providing opportunities for the development of high-performance energy storage devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.nanolett.2c00398.Experimental details, characterizations, DFT calculation, and supplementary figures (PDF)Video 1 Zn plating/stripping of Two-electrode (Zn foil and Zn foil) configuration was applied for the in situ optical microscopy test in the electrolyte of 1 M ZnSO4 − 1 M LiCl. The cell was placed at the specimen stage and the Zn foil was located perpendicular to the incident light source. Meanwhile, galvanostatic deposition was performed by an electrochemical workstation (CHI660E) under a current density of 10 mA/cm2. (MP4)SVideo 2 Zn plating/stripping of Two-electrode (Zn foil and Zn foil) configuration was applied for the in situ optical microscopy test in the electrolyte of 1 M ZnSO4 – 1 M LiCl - 0.4 M TMACl. The cell was placed at the specimen stage and the Zn foil was located perpendicular to the incident light source. Meanwhile, galvanostatic deposition was performed by an electrochemical workstation (CHI660E) under a current density of 10 mA/cm2. (MP4)This article has not yet been cited by other publications.

N-Doped Ti3C2Tx Interfacial Layer Enabling Uniform Zn Deposition along (002) Plane for Stable Aqueous Zinc-Ion Battery

In Situ Nafion-nanofilm Oriented (002) Zn Electrodeposition for Long-Term Zinc-Ion Batteries.

Assembly of Metal–Organic Chemical Conversion Layers As Ion Sieves along with Exposing Zn(002) Planes for Stable Zn Metal Anode

Regulating Uniform Zn Deposition via Hybrid Artificial Layer for Stable Aqueous Zn-Ion Batteries

Ultrathin surface coating of conductive and zincophilic titanium oxynitride enables stable zinc anodes for aqueous zinc-ion batteries

Zn anode surface engineering for stable zinc-ion batteries: Carbon dots incorporated mesoporous TiO2 as a coating layer

Uniform Zinc Deposition Regulated by a Nitrogen‐Doped MXene Artificial Solid Electrolyte Interlayer

Achieving stable Zn metal anode via a simple NiCo layered double hydroxides artificial coating for high performance aqueous Zn-ion batteries

Influence of MXene-assisted multifunctional interface on zinc deposition toward highly reversible dendrite-free zinc anodes

Nucleophilic Interfacial Layer Enables Stable Zn Anodes for Aqueous Zn Batteries

Dispersed Zn Nucleation and Growth Induced by Functional Nano-TiO2 Particles for a Stable Zn Metal Anode

Artificial Solid-Electrolyte Interface Facilitating Uniform Zn Deposition by Promoting Chemical Adsorption

Heterostructured Interface Enables Uniform Zinc Deposition for High‐Performance Zinc‐Ion Batteries

Interface Engineering via Ti3C2Tx MXene Electrolyte Additive toward Dendrite-Free Zinc Deposition

An Artificial Interphase Engineering Simultaneously Suppressing Hydrogen Evolution Reaction and Controlling Zinc Dendrite Growth to Achieve Stable Zinc Metal Anodes

Structural Design and Interfacial Characteristics Endow NaTi2(PO4)3 Coated Zinc Anode with High Capacity and Better Cycling Stability

Ultrathin Surface Coating of Nitrogen‐Doped Graphene Enables Stable Zinc Anodes for Aqueous Zinc‐Ion Batteries

Cu‐Modified Ti3C2Cl2 MXene with Zincophilic and Hydrophobic Characteristics as a Protective Coating for Highly Stable Zn Anode

Dendrite-free Zn anode enabled by combining carbon nanoparticles hydrophobic layer with crystal face reconstruction toward high-performance Zn-ion battery

High-surface-area titanium nitride nanosheets as zinc anode coating for dendrite-free rechargeable aqueous batteries

Polyoxotungstate Featuring Zinc‐Ion‐Triggered Structural Transformation as An Efficient Electrolyte Additive for Aqueous Zinc‐Ion Batteries