Abstract:Additive manufacturing (AM) has gained popularity across various industries due to its cost-effectiveness, low material consumption, and minimal environmental impact. Localized electrochemical deposition (LECD), as one of the AM methods, has the capability to produce microcomponents or structures at an microscale in a specific position as designed, without the need for any mask or support material[1]. By reducing copper ions in the local area according to the position of the micro-wire, 3D structures could be produced. This electrochemical deposition process has a significant advantage in that it is a low-temperature process and has lower costs compared to other processes[2]. Using the LECD process, the micrometer of copper columns was conventionally deposited in copper sulfate-based electrolyte[3]. However, this electrolyte has the possibility to cause damage to the metal substrate used as the cathode due to its low pH, resulting in metal dissolution. The utilization of copper pyrophosphate-based electrolyte, which is a solution with a pH close to neutral, can solve this problem. Also, copper pyrophosphate-based electrolyte offers an advantage over conventional alkaline-based electrolytes in that it removes cyanide pollution of the environment and hazards to human health.[4] In this study, the microanode was employed using a platinum wire(100 μm in diameter), while a copper substrate was employed as the cathode in the electrochemical deposition process. The micrometer copper columns were deposited using copper pyrophosphate-based electrolyte by varying the main electrochemical deposition factors, such as applied potential and pulse duty cycle. In addition The surface morphology of the deposited micrometer-scale copper columns was observed through scanning electron microscopy. REFERENCES [1] Suryavanshi, Abhijit P., and Min-Feng Yu. "Probe-based electrochemical fabrication of freestanding Cu nanowire array." Applied Physics Letters 88.8 (2006): 083103. [2] Madden, John D., and Ian W. Hunter. "Three-dimensional microfabrication by localized electrochemical deposition." Journal of microelectromechanical systems 5.1 (1996): 24-32. [3] Lin, J. C., et al. "Localized electrochemical deposition of micrometer copper columns by pulse plating." Electrochimica Acta 55.6 (2010): 1888-1894. [4] Chen, C-C. "A New Process for Cyanide-Free Copper Plating." Electroplating and Pollution Control 23.4 (2003): 10-11.

Preparation of fine copper powders by galvanostatic regime of electrolysis of copper scrap in a cylindrical electrochemical cell

RETRACTED: Copper Electrodeposition in Through-Silicon Via under Galvanostatic Condition

A Catalytic Oxidation Approach to Coat Copper Powder with Polyaniline

Using design of experiments in synthesis of ultra-fine copper particles by electrolysis

Experimental analysis of the performance of innovative circulation configurations for cleaner copper electrolysis

Preparation and Application of Ultrafine Copper Powder

Preparing of Ultrafine Copper Powder by Slurry Electrolysis

Preparation of Ultrafine Copper Powder with Copper Concentrate

Production of Copper Powders by Alternating Current Polarization of a Copper–Titanium Electrode Pair

Lithium insertion in naturally surface-oxidized copper

The Preparation of an Ultrafine Copper Powder by the Hydrogen Reduction of an Ultrafine Copper Oxide Powder and Reduction Kinetics

Electrochemical Synthesis of Copper Nanowires

Preparation and performance of a three-dimensional porous copper-tin electrode for lithium-ion batteries

Preparation of Ultra-fine Silver-Copper Core-shell Powders for Solar Cell Grid Electrode

Localized Electrochemical Deposition Using Copper Pyrophosphate-Based Electrolyte

Production of Fine Copper Powder Based on the Theory on Preparation of Monodispersed Particles. Production of fine copper powder by disproportionation reaction of cuprous sulfate solution (2nd Report).

Electrochemical behavior of residual salts and an effective method to remove impurities in the formation of porous copper electrode for lithium metal batteries

Effect of electrode material, electrolyte composition, and surfactant on electrochemical synthesis of copper nanoparticles

Particle Size Effects on the Electrochemical Performance of Copper Oxides toward Lithium

Effect of Particle Conductivity of a Packed Bed Reactor on the Electrowinning of Copper

Modulation of Interfacial Characteristics of Copper Electrode by Electrodeposited Cu@Ti for High-Performance Anode-Free Zinc Ion Batteries