Abstract:In this study, a new method of ultrasonic high-frequency percussion (UH-FP) is proposed. Ultra-fine and ultra-long copper tube electrodes cannot be fabricated by traditional processing methods, and the copper tube electrodes fabricated by UH-FP can be used in the process of rotary EDM for microfine holes. The UH-FP setup has been established based on an ultrasonic device, a workpiece chucking and rotation device, and a workpiece reciprocating motion device. In this work, by studying the principle of ultrasonic processing, the processing principle and mechanism of ultra-fine and ultra-long copper tube electrode preparation by ultrasonic high-frequency percussion is proposed. The effects of processing parameters (i.e., rotational speed, feed rate, working gap, percussion amplitude) on surface roughness are evaluated quantitatively. Experimental results show that the proposed method could complete the core leach of the core-containing copper tube electrodes after drawing, while improving surface quality. Some surface defects such as cracks, scratches and folds were completed removed, further improving the mechanical performance of processed parts. The surface roughness (Ra) of 0.091 μm was obtained from the initial 0.46 μm under the optimal processing parameters of 800 rpm tube rotational speed, 200 mm/min platform feed speed, 0.13 mm machining gap, 0.15 mm percussion amplitude, and 32 min machining time. The method shows potential for manufacturing copper tube electrodes for a wide range of industrial applications.

Using design of experiments in synthesis of ultra-fine copper particles by electrolysis

Preparation of fine copper powders by galvanostatic regime of electrolysis of copper scrap in a cylindrical electrochemical cell

Effect of electrode material, electrolyte composition, and surfactant on electrochemical synthesis of copper nanoparticles

High Purity Copper Nanoparticles Via Sonoelectrochemical Approach

Preparing of Ultrafine Copper Powder by Slurry Electrolysis

Achieving Optimal Dendritic Morphology in Ultralight Copper Powder Production through Hydrochloric Acid Intervention

Production of Fine Copper Powder Based on the Theory on Preparation of Monodispersed Particles. Production of fine copper powder by disproportionation reaction of cuprous sulfate solution (2nd Report).

Preparation of High-Purity Ultrafine Copper Powder in Mass-Production by Chemical Reduction Method: Taguchi Robust Design Optimization

Preparation and Application of Ultrafine Copper Powder

Preparation of Ultrafine Copper Powder with Copper Concentrate

Controllable Synthesis of Metal Particles by a Direct Current Electrochemical Approach

Preparation Of Ultra-Fine Copper Powder And Its Application In Manufacturing Conductive Lines By Printed Electronics Technology

Modeling and optimization of surface quality of copper deposits recovered from brass scrap by direct electrowinning

Focused electron beam induced deposition of copper with high resolution and purity from aqueous solutions

Supercritical Hydrothermal Synthesis of Ultra-Fine Copper Particles Using Different Precursors

The Preparation of an Ultrafine Copper Powder by the Hydrogen Reduction of an Ultrafine Copper Oxide Powder and Reduction Kinetics

One-step separation and recovery of copper and sulfur by electrolysis in deep eutectic solvents

Production of Copper Powders by Alternating Current Polarization of a Copper–Titanium Electrode Pair

Effect of Ultrasound Radiation on the Size and Size Distribution of Synthesized Copper Particles

Fabrication of Ultra-Fine and Ultra-Long Copper Tube Electrodes by Ultrasonic High-Frequency Percussion

Interactive Effects of Additives and Electrolyte Flow Rate on the Microstructure of Electrodeposited Copper Foils