Abstract:Currently, it is still a great challenge to obtain copper-based high-efficient dropwise condensation heat transfer (CHT) interfaces via template-free electrodepositing technologies. Here, we report that the density of template-free electrodeposited copper nanocones can maximally reach 1.5 × 106/mm2 by the synergistic control of substrate surface roughness, poly(ethylene glycol) (PEG) molecular weight, and PEG concentration. After thiol modification, the densely packed copper nanocone samples can present low-adhesive superhydrophobicity and condensate microdrop self-jumping function at ambient environment. Condensation heat and mass transfer characterizations show that the CHT coefficient of copper surfaces can maximally enhance 98% for 20 °C vapor and 51% for 40 °C vapor by in situ growth of superhydrophobic densely packed copper nanocones. Although the dropwise condensation mode can change from the jumping mode to the mixed jumping and sweeping mode and the shedding-off mode along with the increase of surface subcooling and vapor temperature, the CHT performance of the nanosample is still superior to that of the contrast flat hydrophobic surface during the whole testing range of surface subcooling. As vapor temperature increases to 80 °C, the CHT performance of the nanosample is inferior to that of the contrast sample. The CHT enhancement under low-temperature vapor should be ascribed to the enhancement of small-drop mass transfer ability caused by low-adhesive superhydrophobicity nature of nanosample surfaces. Their performance degradation mainly results from increased drop-drop drag force along with the increase of surface subcooling and vapor temperature. In sharp contrast, the CHT deterioration under high-temperature vapor should be ascribed to larger drop-surface adhesion and drop-drop drag force. The former is caused by vapor penetration, whereas the latter is caused by the dramatically increased nucleation density and growth rate of condensates. These findings would help design and develop copper-based high-efficiency condensation heat transfer interfaces.

Achieving Optimal Dendritic Morphology in Ultralight Copper Powder Production through Hydrochloric Acid Intervention

Innovative Multiphase Ultrasonic-Assisted Method for High-Purity, Stable, and Cost-Effective Copper Nanowire Synthesis

Preparation of High-Purity Ultrafine Copper Powder in Mass-Production by Chemical Reduction Method: Taguchi Robust Design Optimization

Using design of experiments in synthesis of ultra-fine copper particles by electrolysis

A New Approach to Prepare Fully Dense Cu with High Conductivities and Anti-Corrosion Performance by Cold Spray

Density Maximization of One-Step Electrodeposited Copper Nanocones and Dropwise Condensation Heat-Transfer Performance Evaluation

Electrodeposition of Copper with Ultra-large Grains and Good Conductivity

The Optimal Ratio of Acid Copper Electroforming Solution Based on UV-LIGA Process

Interactive Effects of Additives and Electrolyte Flow Rate on the Microstructure of Electrodeposited Copper Foils

Preparation of Ultrafine Copper Powder with Copper Concentrate

A New Copper Electrodeposition Scheme to Reduce Void Defects after Chemical Mechanical Polishing

Plating Uniformity of Bottom-Up Copper Pillars and Patterns for Ic Substrates with Additive-Assisted Electrodeposition

Properties and Microstructure Regulation of Electrodeposited Ultra-thin Copper Foil in a Simple Additive System

Lifting Polyether Suppression during Cu Electrodeposition

Effect of bromide ions and polyethylene glycol on morphological control of electrodeposited copper foam

Preparation of fine copper powders by galvanostatic regime of electrolysis of copper scrap in a cylindrical electrochemical cell

Modeling and optimization of surface quality of copper deposits recovered from brass scrap by direct electrowinning

Ecologically Friendly Production of Copper Powder and Elimination of Cupric Ions from Aqueous Solutions using D-Glucose and Ascorbic Acid

The Preparation of an Ultrafine Copper Powder by the Hydrogen Reduction of an Ultrafine Copper Oxide Powder and Reduction Kinetics

Experimental and Computational Investigation of Complexing Agents on Copper Dissolution for Chemical Mechanical Polishing Process

Preparation and Application of Ultrafine Copper Powder