Abstract:For inspection of mechanical properties and integrity of critical components such as integrated circuits or composite materials by acoustic methodology, it is imperative to evaluate their acoustic reflection coefficients, which are in close correlation with the elastic properties, thickness, density, and attenuation and interface adhesion of these layered structures. An experimental method based on angular spectrum to evaluate the acoustic coefficient as a function of the incident angle, θ, and frequency, ω, is presented with high frequency time-resolved acoustic microscopy. In order to achieve a high spatial resolution for evaluation of thin plates with thicknesses about one or two wavelengths, a point focusing transducer with a nominal center frequency of 25 MHz is adopted. By measuring the V(z, t) data in pulse mode, the reflection coefficient, R(θ, ω), can be reconstructed from its two-dimensional spectrum. It brings simplicity to experimental setup and measurement procedure since only single translation of the transducer in the vertical direction is competent for incident angle and frequency acquisition. It overcomes the disadvantages of the conventional methods requiring the spectroscopy for frequency scanning and/or ultrasonic goniometer for angular scanning. Two substrates of aluminum and Plexiglas and four stainless plates with various thicknesses of 100 μm, 150 μm, 200 μm, and 250 μm were applied. The acoustic reflection coefficients are consistent with the corresponding theoretical calculations. It opened the way of non-destructive methodology to evaluate the elastic and geometrical properties of very thin multi-layers structures simultaneously.

A method for extracting sole mechanical properties of Bragg reflector by GHz ultrasonic pulse-echo technique

Angular Measurement of Acoustic Reflection Coefficients by the Inversion of V(z, T) Data with High Frequency Time-Resolved Acoustic Microscopy

Theoretical Analysis of Solidly Mounted Film Bulk Acoustic Resonator with Nanocrystalline Diamond As High Impedance Material of Bragg Reflector

Metallic multilayers for X-band Bragg reflector applications

Influence of Α- and Β-W Phases on Performance of SMR Devices

18 GHz Solidly Mounted Resonator in Scandium Aluminum Nitride on SiO2/Ta2O5 Bragg Reflector

Full-epitaxial ScAlN and MgZnO solidly mounted resonators based on epitaxial acoustic Bragg reflector

Progress of Research on the Thin-film Bulk Acoustic Resonator

Experimental Demonstration of Thermally Tunable Fano and EIT Resonances in Coupled Resonant System on SOI Platform

Simulation Analysis of SMR with Tetrahedral Amorphous Carbon As High Impedance Material of Bragg Reflection

BAW Resonator with an Optimized SiO<sub>2</sub>/Ta<sub>2</sub>O<sub>5</sub> Reflector for 5G Applications

Direct Comparison of the Gravimetric Responsivities of ZnO-based FBARs and SMRs

Three-Dimensional Finite Element Analysis and Characterization of Quasi-Surface Acoustic Wave Resonators

Analysis Of Rayleigh-Mode Spurious Response Using Finite Element Method/Spectrum Domain Analysis For Surface Acoustic Wave Resonator On Nonflat Sio2/Al/Linbo3 Structure

Sample Design in Resonant Ultrasound Spectroscopy for Measuring Material Constants of Scaln Piezoelectric Film

High reflectivity high-Q micromechanical Bragg mirror

Single Crystal Bulk Acoustic Resonator for 5 GHz and High-Power Applications

A Simple Technique to Evaluate Lateral Leakage and Transverse Mode Behaviors of Reflectors in SH-Type SAW Resonator

Refractive index evaluation of porous silicon using Bragg reflectors

Analysis of Rayleigh-Mode Spurious Response Using Finite Element Method/Spectrum Domain Analysis for Surface Acoustic Wave Resonator on Nonflat SiO<sub>2</sub>/Al/LiNbO<sub>3</sub> Structure