Abstract:Surface acoustic waves (SAWs) are of practical importance across several fields. Particularly, a wide range of SAW devices is available, which are based on the stacking piezoelectric layered hetero-structures. As such, efficient and stable algorithm of analyzing electromechanical coupling factor (K2) should be of specific interest, inspiring a variety of piezoelectric layered structures. Motivated by the above considerations, this paper exploits the performance of Sc43% AlN57%/ZnO/diamond piezoelectric hetero-structures using matrix and polynomial methods. Consequently, dispersion curves, the electromechanical coupling factor and profiles of Rayleigh waves are calculated, in which the properties of hexagonal intermediate ZnO layer are varied. Here, $$ (0001) - [10\bar{1}0]{\text{ZnO}} $$ or $$ (11\bar{2}0) - [0001]{\text{ZnO}} $$ directions of the middle layer were integrated with Sc43% AlN57%/diamond to be a composite hetero-structure with a larger K2 of SAW. Accordingly, a commercial ZnO specimen was characterized by scanning electron microscopy (SEM) as well as Raman and XRD spectroscopy to determine its available crystallographic directions and the C-axis hexagonal character. Comparing with conventional AlN/diamond hetero-structures, the inclusion of ZnO as the intermediate layer provides with an excellent electromechanical coupling factor which significantly improves the $$ (11\bar{2}0) - [0001] $$ structure. However, comparing with the ZnO/diamond hetero-structure, a high phase velocity (Vph) was observed. Therefore, the development of a well-balanced structure that maximizes the values of Vph and K2 is systematically challenging. Moreover, it was found that initial stresses have a significant effect on the Rayleigh wave velocities. Fundamental A0 Lamb mode can be generated in piezoelectric hetero-structures when the properties of substrate remain very low relative to the film. Numerical results obtained in this paper can provide a deeper insight into the nature of the Rayleigh wave behaviors in piezoelectric hetero-structures, involving a ZnO intermediate layer.

Full-epitaxial ScAlN and MgZnO solidly mounted resonators based on epitaxial acoustic Bragg reflector

Epitaxial ZnO piezoelectric layer on SiO 2 /Mo solidly mounted resonator fabricated using epitaxial Au sacrificial layer

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Single Crystal Bulk Acoustic Resonator for 5 GHz and High-Power Applications

Single-crystalline Bulk Acoustic Wave Resonators Fabricated with AlN Film Grown by a Combination of PLD and MOCVD Methods

18 GHz Solidly Mounted Resonator in Scandium Aluminum Nitride on SiO2/Ta2O5 Bragg Reflector

A High Quality Factor, 19-GHz Periodically Poled AlScN BAW Resonator Fabricated in a Commercial XBAW Process

9.5–12 GHz solidly mounted bulk acoustic wave resonators utilizing overtone of thickness extension mode

Theoretical and Experimental Study of High-Electromechanical-Coupling Surface Acoustic Wave Resonators Based on A-Plane (1120)al0.56sc0.44n Films

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

Use of periodic 2D pillar array for performance enhancement of AlN-based SMR BAW resonators

Theoretical and experimental study of high electromechanical coupling SAW resonators based on a‐plane ( 11 2 ̄ 0 ) Al0.56Sc0.44N films

Influence of a Piezoelectric ZnO Intermediate Layer on Rayleigh Waves Propagating in Sc 43% AlN 57% /zno/diamond Hetero-Structures Subjected to Uniaxial Stress

High-Performance SAW Resonators Based on Single-crystalline a-Plane AlN Thin Films on Sapphire Substrates

C-Band Lithium Niobate on Silicon Carbide SAW Resonator With Figure-of-Merit of 124 at 6.5 GHz

Lateral Field Excitation of Thickness Longitudinal Mode and Shear Mode with ZnO Based on Solidly Mounted Resonator

Complementary-Switchable Dual-Mode SHF Scandium-Aluminum Nitride BAW Resonator

Fabrication and characterization of hybrid bulk and surface acoustic wave resonators with Ag/patterned-AlN/Mo/diamond/Si layered structure

Solidly Mounted Resonators with Ultra‐High Operating Frequencies Based on 3R‐MoS2 Atomic Flakes

Millimeter Wave Thin-Film Bulk Acoustic Resonator in Sputtered Scandium Aluminum Nitride Using Platinum Electrodes

ScAlN-on-SiC Ku-Band Solidly-Mounted Bidimensional Mode Resonators