Abstract:One approach to extend the acoustic applications of aluminum nitride (AlN) in the GHz frequency range is to take advantage of the piezoelectric performance and high acoustic velocity (∼11 350 m/s) along the c-axis of this material. In particular, in the case of high-frequency micro-electromechanical systems, it should be possible to simplify the construction of resonators by using a-plane AlN-based structures. In the work described in this Letter, a single-crystalline a-plane AlN layer on an r-plane sapphire substrate is obtained by combining sputtering and high-temperature annealing. Based on this non-polar AlN, a resonator with only planar interdigital transducer electrodes is fabricated. Experiments on this resonator reveal simultaneous excitation of an anisotropic Rayleigh surface acoustic wave (SAW) at 2.38 GHz and a laterally excited bulk acoustic wave (LBAW) at 4.00 GHz. It is found that the Rayleigh SAW exhibits outstanding performance, with a quality factor as high as 2458 and great stability under variations in temperature. The LBAW at 4.00 GHz is excited by pure planar interdigitated electrodes without the need for any cavity or bottom electrode structure, thus demonstrating a promising approach to the construction of high-frequency resonators with a relatively simple structure.

9.5–12 GHz solidly mounted bulk acoustic wave resonators utilizing overtone of thickness extension mode

X-Band Bulk Acoustic Wave Resonators with High Figure of Merit Based on Al0.8Sc0.2N

Full-epitaxial ScAlN and MgZnO solidly mounted resonators based on epitaxial acoustic Bragg reflector

Single Crystal Bulk Acoustic Resonator for 5 GHz and High-Power Applications

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Double-layer Thin-film LiNbO3 Longitudinally Excited Shear Wave Resonators with Ultra-large Electromechanical Coupling Coefficient and Spurious-Free Performance

The Thin Film Bulk Acoustic Wave Resonator Based On Single-Crystalline 43 Degrees Y-Cut Lithium Niobate Thin Films

Mo/Ti multilayer Bragg reflector for LiNbO<sub>3</sub> film bulk acoustic wave resonators

C-Band Lithium Niobate on Silicon Carbide SAW Resonator With Figure-of-Merit of 124 at 6.5 GHz

Complementary-Switchable Dual-Mode SHF Scandium-Aluminum Nitride BAW Resonator

High Frequency Operation for Resin-Coated BAW Beam Devices

High Figure-of-Merit A1-Mode Lamb Wave Resonators Operating Around 6 GHz Based on the LiNbO3 Thin Film

Spurious resonance suppression in gigahertz-range ZnO thin-film bulk acoustic wave resonators by the boundary frame method: modeling and experiment

Solidly Mounted Longitudinally Excited Shear Wave Resonator (YBAR) Based on Lithium Niobate Thin-Film

6 Mhz Baw Resonators Fabricated Using New Piezoelectric Crystals Prca4o(Bo3)(3) and Ndca4o(Bo3)(3)

18 GHz Solidly Mounted Resonator in Scandium Aluminum Nitride on SiO2/Ta2O5 Bragg Reflector

A novel thickness-shear mode resonator using a LiNbO 3 plate with an inversion layer

Wide Band BAW Filter Based on Single-Crystalline LiNbO₃ Thin Film with Insulating Bragg Reflector

Resonance analysis of longitudinal leaky surface acoustic wave third harmonic on LiNbO3/quartz bonded structure

LITHIUM NIOBATE THIN FILM BASED A1 MODE RESONATORS WITH FREQUENCY UP TO 16 GHZ AND ELECTROMECHANICAL COUPLING FACTOR NEAR 35%

Investigation on the temperature coefficient of frequency performance of LiNbO3 on quartz and glass surface acoustic wave resonators