Abstract:Multilayered substrates, including thin plates of LiTaO3 (LT) bonded to silicon (Si) or glass wafers either directly or via intermediate layers, were numerically investigated as potential materials for surface acoustic wave (SAW) resonators with high quality (Q)-factor required for the next generation of mobile communication systems. The propagation velocities and electromechanical coupling coefficients of shear horizontally (SH) polarized acoustic waves were estimated as functions of LT orientation and thicknesses of all layers in LT/Si, LT/SiO2/Si, LT/glass, LT/AlN/glass and structures with several pairs of SiO2/AlN layers between LT and the glass wafer. Optimal combinations of cut angle, LT and electrode thicknesses, as well as the number and thicknesses of intermediate layers, required for the construction of resonators with improved performance were observed for each analyzed structure. In the resonators employing LT/Si and LT/SiO2/Si structures with 30°YX - 48°YX LT cuts, high electromechanical coupling k2, reaching 11.6%, can be combined with high velocities up to 4000 m/s, zero TCF at the resonant frequency and Q-factors that are considerably higher than in the LSAW filters using regular LT substrates. To understand the loss mechanisms that limit resonator Q-factors in LT/glass, mechanical displacements that accompany wave propagation in multilayered structures were visualized. Investigation of the nature of acoustic modes and their transformations with number and thicknesses of the layers revealed that the low-velocity glass wafer can be used as a supporting substrate if an intermediate AlN layer or alternating pairs of low- and high-velocity layers, for example SiO2/AlN, are introduced between LT and the glass wafer.

Investigation on the temperature coefficient of frequency performance of LiNbO3 on quartz and glass surface acoustic wave resonators

Comparative Study of SAW Temperature Sensor Based on Different Piezoelectric Materials and Crystal Cuts for Passive Wireless Measurement

A Spurious-Free SAW Resonator with Near-Zero TCF Using LiNbO3/SiO2/quartz

Resonance analysis of longitudinal leaky surface acoustic wave third harmonic on LiNbO3/quartz bonded structure

Heterogeneous integration of lithium tantalate thin film on quartz for high performance surface acoustic wave resonator

Heterogeneous Integration of 42°YX LiNbO3/SiO2/Quartz for Wideband and Spurious-Free SAW Resonators

Layered LiNbO $_{3}$ /At-Quartz Wideband Devices with Inherent Transverse Mode Suppression

Analysis of propagation and resonance properties of longitudinal leaky surface acoustic wave on LiNbO 3 /SiC bonded structure

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

A High Sensitivity Temperature Sensor Using High-<i>Q</i> NS-SAW Resonator

Multilayered structures using thin plates of LiTaO3 for acoustic wave resonators with high quality factor

Single-Crystalline LiTaO 3 Film-Based High-Frequency Surface Acoustic Wave Resonators and Electronics Applications

Three-Dimensional Finite Element Analysis and Characterization of Quasi-Surface Acoustic Wave Resonators

Thin-Film Lithium Niobate Acoustic Resonator with High Q of 237 and k2 of 5.1% at 50.74 GHz

C-Band Lithium Niobate on Silicon Carbide SAW Resonator With Figure-of-Merit of 124 at 6.5 GHz

Zero-Group-Velocity acoustic waveguides for high-frequency resonators

Surface Acoustic Wave Devices Based on High Quality Temperature-Compensated Substrates

Geometry Characteristics and Wide Temperature Behavior of Silicon-Based GaN Surface Acoustic Wave Resonators with Ultrahigh Quality Factor

Characteristics of one-port surface acoustic wave resonator fabricated on ZnO/6H-SiC layered structure

High-Performance Acoustic Wave Devices on LiTaO$_{3}$/SiC Hetero-Substrates

Spurious-Free Shear-horizontal SAW Resonators Using LiTaO3/SiO2/Si Substrate