Abstract:Multilayered substrates, including thin plates of LiTaO3 (LT) bonded to silicon (Si) or glass wafers either directly or via intermediate layers, were numerically investigated as potential materials for surface acoustic wave (SAW) resonators with high quality (Q)-factor required for the next generation of mobile communication systems. The propagation velocities and electromechanical coupling coefficients of shear horizontally (SH) polarized acoustic waves were estimated as functions of LT orientation and thicknesses of all layers in LT/Si, LT/SiO2/Si, LT/glass, LT/AlN/glass and structures with several pairs of SiO2/AlN layers between LT and the glass wafer. Optimal combinations of cut angle, LT and electrode thicknesses, as well as the number and thicknesses of intermediate layers, required for the construction of resonators with improved performance were observed for each analyzed structure. In the resonators employing LT/Si and LT/SiO2/Si structures with 30°YX - 48°YX LT cuts, high electromechanical coupling k2, reaching 11.6%, can be combined with high velocities up to 4000 m/s, zero TCF at the resonant frequency and Q-factors that are considerably higher than in the LSAW filters using regular LT substrates. To understand the loss mechanisms that limit resonator Q-factors in LT/glass, mechanical displacements that accompany wave propagation in multilayered structures were visualized. Investigation of the nature of acoustic modes and their transformations with number and thicknesses of the layers revealed that the low-velocity glass wafer can be used as a supporting substrate if an intermediate AlN layer or alternating pairs of low- and high-velocity layers, for example SiO2/AlN, are introduced between LT and the glass wafer.

Metallic multilayers for X-band Bragg reflector applications

Permalloy–FeMn Exchange-Biased Multilayers Grown on Flexible Substrates for Microwave Applications

Ba0.9sr0.1tio3-Based Bragg Reflectors Fabricated from One Single Chemical Solution

A method for extracting sole mechanical properties of Bragg reflector by GHz ultrasonic pulse-echo technique

Transmission Characteristics of A Plasmonic Bragg Reflector Based on A Metal-Embedded Slot Structure

High-Efficient Photoacoustic Generation With An Ultrathin Metallic Multilayer Broadband Absorber

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Full-epitaxial ScAlN and MgZnO solidly mounted resonators based on epitaxial acoustic Bragg reflector

A New Artificial Dielectric Metamaterial and its Application as a THz Anti-Reflection Coating

High Electromechanical Coupling Coefficient of Longitudinally Excited Shear Wave Resonator Based on Optimized Bragg Structure

Quasiperiodic metallic multilayers

A New Method for Obtaining Transparent Electrodes.

A New Mechanism to Design Transparent Electrodes: Thz Realizations

Metallic subwavelength structures for a broadband infrared absorption control

Multilayered structures using thin plates of LiTaO3 for acoustic wave resonators with high quality factor

Electromagnetic Field Tapering in the High-Roughness Substrates Coated by a Thin Film of Manganese: A Lithography-Free Approach to Ultra-Broadband, Wide-Angle, UV to FIR Perfect Absorption

Plasma-enhanced chemical vapor deposition a-SiOCN:H low-Z thin films for bulk acoustic wave resonators

Broadband plasma spray anti-reflection coating technology for millimeter-wave astrophysics

Robust Metallic Nanolaminates Having Phonon-Glass Thermal Conductivity

Analytical modeling of acoustic exponential materials and physical mechanism of broadband anti-reflection

Design and Fabrication of a High Frequency Thin Film Resonator Using Low Acoustic Impedance Reflective Layer