Abstract:In this letter, a refractive index sensing system is proposed and experimentally demonstrated. Acting as the sensing head, the no-core fiber spliced with two sections of single-mode fiber (SNS) is fabricated to form a fiber ring laser (FRL). The measured salt water changes the self-imaging wavelength of the NCF as well as the central wavelength of the FRL. After that, the light is introduced into the dual-loop optoelectronic oscillator (OEO). With the help of the dispersion compensation module in the OEO loop, the wavelength change is mapped into the frequency shift of the generated microwave signal. Hence, the RI of the measured liquid can be recovered by tracking the frequency change. Both the simulation analysis and the proof of concept experiment are performed. Results show that both the central wavelength of the FRL and the microwave signal increase exponentially with the increased RI, agreeing with the simulated analysis. In the range of 1.33-1.38, the linear fitting results manifest that the sensitivities of central wavelength change vs. RI and microwave signal shift vs. RI are 87.70 nm/RIU and 83.89 MHz/RIU, the corresponding resolutions are and , respectively. The proposed method shows potential for realizing high sensitivity, fast, and real-time RI measuring.

Optical fiber refractive index sensor based on the double cladding fiber

Highly Sensitive Refractive Index Sensor Based on a Cladding-Etched Thin-Core Fiber Sandwiched Between Two Single-Mode Fibers

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

Refractive index sensor based on ultrafine tapered single-mode nocladding single-mode fiber structure

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

Optical Refractive-Index Sensor Based on Dual Fiber-Bragg Gratings Interposed with a Multimode-Fiber Taper

Core-cladding mode recoupling based fiber optic refractive index sensor

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Fiber structure based on a depressed inner cladding fiber for bend, refractive index and temperature sensing

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

Refractive index and temperature sensors based on no-core fiber cascaded with long period fiber grating

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

Folded-tapered multimode-no-core fiber sensor for simultaneous measurement of refractive index and temperature

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

Balloon-like Singlemode-Tapered Multimode-Singlemode Fiber Structure for Refractive Index Sensing

Measurable Refractive Index Range for a Doubly Cladding Single Mode Fiber Sensor and Its Application in Temperature and Humidity Sensing

Sensitivity Enhanced Refractive Index Sensor With In-Line Fiber Mach-Zehnder Interferometer Based on Double-Peanut and Er-Doped Fiber Taper Structure

Miniature Single-Mode Fiber Refractive Index Interferometer Sensor Based on High Order Cladding Mode and Core-Offset

High Sensitive Refractive Index Sensor Based on Dispersion Turning Point Long-Period Fiber Gratings in Tapered Fiber

High Resolution Refractive Index Sensing with Dual-Wavelength Fiber Laser