Abstract:A highly sensitive fiber-optic refractive index (RI) sensor with low-temperature cross-sensitivity is proposed and demonstrated. The RI sensitivity of Mach–Zehnder interferometer (MZI), which is generated by the optical path difference (OPD) between HE11 and HE12 modes in tapered microfiber, can be theoretically improved to by operating at the dispersion turning point (DTP), but limited by the narrow free spectral range (FSR) and fragile sensor structure as the waist diameter is less than at DTP. To solve the problem of fragile sensor structure and difficulty in micromachining of traditional tapered microfiber working at the DTP, the Vernier effect is introduced by cascading two microfiber MZIs with larger diameters of about . The RI sensitivity can be amplified reaching 46467 nm/RIU with temperature cross-sensitivity only RIU/°C in the aqueous solution. Moreover, the magnification factor M can be adjusted desirably as the RI sensitivity and FSR of single MZI can be adjusted by changing the waist diameter and the waist length; then, the RI sensitivity can be improved further exceeding 106 nm/RIU, which is the highest of all the fiber-optic RI sensors to the best of our knowledge. The proposed RI sensor with ultrahigh sensitivity, and robust and reliable structure shows great significance for biochemical trace detection, such as slight RI variations caused by small biological molecules or extremely low concentration biological samples.

Refractive index sensor based on ultrafine tapered single-mode nocladding single-mode fiber structure

Refractive index sensors based on the fused tapered special multi-mode fiber

Highly Sensitive Refractive Index Sensor Based on a Cladding-Etched Thin-Core Fiber Sandwiched Between Two Single-Mode Fibers

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

Balloon-like Singlemode-Tapered Multimode-Singlemode Fiber Structure for Refractive Index Sensing

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

High-Sensitivity Refractive Index Sensing Based on an SNPNS Composite Structure

Improvement on Refractive Index Sensing by Exploiting the Tapered Two-Mode Fibers

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

Ultra-Sensitive Refractive Index Sensor with Slightly Tapered Photonic Crystal Fiber

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Optical Refractive-Index Sensor Based on Dual Fiber-Bragg Gratings Interposed with a Multimode-Fiber Taper

High Sensitivity Evanescent Field Refractometer Based on Modal Interference in Micro-Capillary Wall

Ultracompact refractive index sensor based on microcavity in the sandwiched photonic crystal waveguide structure

Sensitive refractive index sensor based on an assembly-free fiber multi-mode interferometer fabricated by femtosecond laser

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach–Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect

Cascaded Fiber Non-Adiabatic Taper and Sagnac Loop for Refractive Index Sensing