Abstract:The present study proposes and experimentally verifies a refractive index (RI) sensor with high sensitivity and simple structure based on multimode Mach-Zehnder interference (MZI), in which a suspend-core fiber (SCF) fused with single-mode fibers (SMFs) at both ends worked as the sensing unit. Femtosecond laser is used to process SCF, forming microfluidic channels for liquid in and out, and then encapsulation is conducted to enhance mechanical characteristics of the MZI sensor. By analyzing simulation and experimental results, it has been confirmed that the multimode MZI arises from the effective RI difference between the fundamental mode and the higher-order modes of the SCF core induced by RI variations of external environment. This study involves the preparation and testing of three sensors with varying SCF lengths. As the external RI varies in range of 1.3333 to 1.3472, all sensors exhibit sensitivities at a comparable level. This observation aligns well with the theoretical analysis, indicating that fiber length does not have direct impact on the sensing performance. The maximum sensitivity was 1825.41 nm/RIU. The three sensors undergo tests to assess their repeatability and stability, revealing a maximum wavelength error of 0.1975 nm for repeatability and 0.18 nm for stability. In addition, the temperature sensitivity within the range of 20-100 °C is found to be as low as 0.00667 nm/°C, indicating that the potential impact of temperature-induced wavelength shift can be disregarded. The sensor exhibits high sensitivity, excellent repeatability and stability, promising extensive application in diverse fields including biology, chemistry, medicine, and environmental monitoring.

High Sensitivity Evanescent Field Refractometer Based on Modal Interference in Micro-Capillary Wall

High-sensitivity, evanescent field refractometric sensor based on a tapered, multimode fiber interference.

Optical Fiber Sensor Based on Capillary Wall for Highly-Sensitive Refractive Index Measurement

Refractive index sensors based on the fused tapered special multi-mode fiber

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

A High Sensitivity Refractometer Based on A Tapered Scsmf Structure and Its Application to Biosensing

High Sensitivity Refractive Index Sensor based on a Tapered Single-mode-Multimode-Single-mode Fiber Structure

A Reflective Fiber-Optic Refractive Index Sensor Based on Multimode Interference in A Coreless Silica Fiber

A Simple High-Sensitivity Sensor Based on Multimode Mach-Zehnder Interference for Refractive Index Measurement

Slight-Offset Tapered Multimode Fiber with High Sensitivity for Low Refractive Index Range

Intensity Modulation Photonic Crystal Fiber Based Refractometer in the Visible Wavelength Range

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

SMF Taper Evanescent Field-Based RI Sensor Combined with Fiber Loop Ring Down Technology

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

Enhanced Refractometer Based on Periodically Tapered Small Core Singlemode Fiber

High Sensitivity Refractive Index Sensor Based on a Tapered Small Core Single-Mode Fiber Structure.

An Interferometric Dual Microfiber Refractive Index Sensor via Tapering of Femtosecond Laser Perforated Optical Fiber

Refractive Index Sensor Based on Tapered Multicore Fiber

Ultrasensitive Refractive Index Fiber Sensor Based on High-Order Harmonic Vernier Effect and a Cascaded FPI.

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

Refractive index sensor based on etched eccentric core few-mode fiber dual-mode interferometer.