Abstract:A high sensitivity liquid refractive index (RI) sensor based on a single mode fiber-multimode fiber-tapered thin-core fiber-single mode fiber (SMTTS) structure is simulated by the beam propagation method (BPM). The modal interference between core and cladding mode happened because of modal mismatch and the transmission spectrum is calculated by BPM. The approximate linear relationship between liquid RI and spectrum dip wavelength shifts is obtained to demodulate RI value. To make a comparison, transmissions of single mode fiber-thin-core fiber-single mode fiber (STS) as well as single mode fiber-multimode fiber-thin-core fiber-single mode fiber (SMTS) are also calculated. It is significantly shown that the interference is improved by the segment of multimode fiber (M_MF). And the tapered thin-core fiber (TCF) has the functions that not only further can enhance the fringe visibility, but also can increase the RI sensitivity, which is higher with the thinner thin-core taper diameter. When the taper diameter is 53.51m, the average RI sensitivity could reach up to -116.7nm/RIU within the RI range of 1.33 to 1.39. This is much higher than the value of SMTS structure. And in the practice application, it could be a slimmer taper in the SMTTS structure to improve the sensitivity just achieving by a simple fabrication process. All process could be finished using fusion splicer, cutter and hydrogen flame.

High Sensitivity Balloon-Like Refractometric Sensor Based on Singlemode-Tapered Multimode-Singlemode Fiber

Balloon-like Singlemode-Tapered Multimode-Singlemode Fiber Structure for Refractive Index Sensing

Refractive index sensors based on the fused tapered special multi-mode fiber

High Sensitivity Refractive Index Sensor Based On Tapered Thin-Core Fiber

High sensitivity fiber refractive index sensor based on tapered multimode fiber

Slight-Offset Tapered Multimode Fiber with High Sensitivity for Low Refractive Index Range

A High Sensitivity Refractometer Based on A Tapered Scsmf Structure and Its Application to Biosensing

Enhanced Refractometer Based on Periodically Tapered Small Core Singlemode Fiber

Fiber-Optic Refractive Index Sensor Based on Multi-Tapered SMS Fiber Structure

A High-Sensitivity SPR Sensor Based on MMF-Tapered HCF-MMF Fiber Structure for Refractive Index Sensing

High Sensitivity Refractive Index Sensor Based on a Tapered Small Core Single-Mode Fiber Structure.

High Sensitivity Refractive Index Sensor based on a Tapered Single-mode-Multimode-Single-mode Fiber Structure

High-sensitivity, evanescent field refractometric sensor based on a tapered, multimode fiber interference.

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

Enhancement of Ri Sensitivity Through Bending A Tapered-Smf-Based Balloon-Like Interferometer

An Ultra-Low Loss Balloon-Type Single Stress-Applying Optical Fiber Refractive Index Sensor

A Compact Refractometer with High Sensitivity Based on Multimode Fiber Embedded Single Mode-No Core-Single Mode Fiber Structure

High Sensitivity Refractometer Based on a Tapered-Single Mode-No Core-Single Mode Fiber Structure

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

Refractive Index Sensor Based on Tapered Multicore Fiber

A Sensitivity-Enhanced Refractive Index Sensor Using A Single-Mode Thin-Core Fiber Incorporating an Abrupt Taper