Abstract:This paper proposes a dual-core photonic crystal fiber (PCF) refractive index sensor. And we use the full vector finite element method (FEM) under the anisotropic perfect matching layer (PML) boundary condition to study the effects of various parameters of the sensor on performances. By two airholes which filled with the liquid to be analyzed, the two cores coupled with each other, the refractive index range is 1.36–1.44. Numerical calculations were carried out on the sensor characteristics. The simulation results show that: when the refractive index range is 1.36–1.42, the average sensitivity can be up to 10,315 nm/RIU (refractive index unit), the highest sensitivity can be up to 13,502 nm/RIU when the liquid refractive index is 1.42, the quadratic fitting coefficient R12\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$${R}_{1}^{2}$$\end{document} = 0.99969. And when the refractive index range is 1.42–1.44, the average sensitivity can be up to 17,980 nm/RIU, the highest sensitivity can be up to 22,380 nm/RIU when the liquid refractive index is 1.44, the quadratic fitting coefficient R22\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$${R}_{2}^{2}$$\end{document} = 0.99999. The sensor we proposed is suitable for biomolecules and chemistry, as its conventional wide detection range with high sensitivity. Most importantly, a new idea of broadening the detection range is put forward for reference.

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Highly Sensitive Refractive Index Sensor Based on a Cladding-Etched Thin-Core Fiber Sandwiched Between Two Single-Mode Fibers

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

High Sensitivity Evanescent Field Refractometer Based on Modal Interference in Micro-Capillary Wall

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

High sensitivity with wide detection range refractive index sensor based on dual-core photonic crystal fiber

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

High-sensitivity refractive index sensor with cascaded dual-core photonic crystal fiber based on vernier effect

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

Folded-tapered multimode-no-core fiber sensor for simultaneous measurement of refractive index and temperature

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

Ultra-Sensitive Refractive Index Sensor with Slightly Tapered Photonic Crystal Fiber

High Sensitivity Balloon-Like Refractometric Sensor Based on Singlemode-Tapered Multimode-Singlemode Fiber

A novel temperature insensitive refractive index sensor based on dual photonic crystal fiber

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Ultrasensitive Temperature Sensor Based on Refractive Index Liquid-Sealed Thin-Core Fiber Modal Interferometers

Highly Improved Refractive Index Sensitivity in Fiber Mach-Zehnder Interferometer Based on Two Tapers