Abstract:The paper proposed and studied a Mach-Zehnder mode interferometric refractive index sensor, which is based on splicing points tapered SMF-PCF-SMF (SMF, single-mode fiber; PCF, photonic crystal fiber) structure. For the reason that the effective refractive index of photonic crystal fiber cladding high-order modes near fiber core are more sensitive to surrounding refractive index changes, the refractive index measurement sensitivity of splicing points tapered SMF-PCF-SMF Mach-Zehnder mode interferometer can be enhanced further through tapering the splicing points. Relations between refractive index measurement sensitivity and photonic crystal fiber length and taper waist diameter are studied through numerical simulations and experiments. Simulation and experimental results show that sensitivity will be increased with the increase of photonic crystal fiber length and the decrease of taper waist diameter. In the refractive range of 1.3333-1.3737, splicing points tapered SMF-PCF-SMF Mach-Zehnder mode interferometer with PCF length of 4 cm and taper waist diameter of 60.4 mu m has refractive index measurement sensitivity of 260.8 nm/RIU, compared with sensitivity of 224.2 nm/RIU of direct splicing SMF-PCF-SMF Mach-Zehnder mode interferometer with PCF length of 4 cm, the sensitivity increased by 16.3%. The research shows that the sensing structure is with good linearity and repeatability. (C) 2015 Elsevier B.V. All rights reserved.

Ultra-Sensitive Refractive Index Sensor with Slightly Tapered Photonic Crystal Fiber

Refractive Index Sensor Based on S-Tapered Photonic Crystal Fiber

Tapered Photonic Crystal Fiber Interferometer with Enhanced Sensitivity

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

Sensitivity-Enhanced Photonic Crystal Fiber Refractive Index Sensor with Two Waist-Broadened Tapers

Ultrashort and High-Sensitivity Refractive Index Sensor Based on Dual-Core Photonic Crystal Fiber

All-Fiber Mach-Zehnder Interferometer Using A Tapered Photonic Crystal Fiber for Refractive Index Measurement

S-Tapered Photonic Crystal Fiber Interferometers for Refractive Index Sensing

Refractive Index Sensing Based on Photonic Crystal Fiber Interferometer Structure with Up-Tapered Joints

Ultracompact refractive index sensor based on microcavity in the sandwiched photonic crystal waveguide structure

A High Sensitivity Refractive Index Sensor Based on Photonic Crystal Fibre Mach–Zehnder Interferometer

Refractive Index and Strain Sensor Made of S-Tapered Photonic Crystal Fiber

Low-temperature Sensitivity Periodically Tapered Photonic Crystal-Fiber-based Refractometer.

A Sensitivity-Enhanced Refractive Index Sensor Using A Single-Mode Thin-Core Fiber Incorporating an Abrupt Taper

PCF Taper-Based Mach–Zehnder Interferometer for Refractive Index Sensing in a PDMS Detection Cell

Refractive Index Sensor Based on Thin-Core Microfiber

Miniature tapered photonic crystal fiber interferometer with enhanced sensitivity by acid microdroplets etching.

High Sensitivity Refractive Index Sensor Based on Splicing Points Tapered Smf-Pcf-Smf Structure Mach-Zehnder Mode Interferometer

High Sensitivity Interferometric Refractive Index Sensor Based on Tapered Polarization-Maintaining Fiber

Refractive Index Sensor Based on Tapered Multicore Fiber

A Highly Sensitive Refractive Index Sensor Based on a V-Shaped Photonic Crystal Fiber with a High Refractive Index Range.