Abstract:In order to achieve a high-precision synchronous detection of two different refractive index (RI) analytes, a D-type surface plasmon resonance (SPR) photonic crystal fiber (PCF) RI sensor based on two channels is designed in this paper. The sensor uses a D-shaped planar region of the PCF and a large circular air hole below the core as the sensing channels. Surface plasmon resonance is induced by applying a coating of gold film on the surface. The full-vector finite-element method (FEM) is used to optimize the structural parameters of the optical fiber, and the sensing characteristics are studied, including wavelength sensitivity, RI resolution, full width at half maximum (FWHM), figure of merit (FOM), and signal-to-noise ratio (SNR). The results show that the channel 1 (Ch 1) can achieve RI detection of 1.36-1.39 in the wavelength range of 1500-2600 nm, and the channel 2 (Ch 2) can achieve RI detection of 1.46-1.57 in the wavelength range of 2100-3000 nm. The two sensing channels can detect independently or simultaneously measure two analytes with different RIs. The maximum wavelength sensitivity of the sensor can reach 30,000 nm/RIU in Channel 1 and 9900 nm/RIU in Channel 2. The RI resolutions of the two channels are 3.54 × 10-6 RIU and 10.88 × 10-6 RIU, respectively. Therefore, the sensor realizes dual-channel high- and low-RI synchronous detection in the ultra-long wavelength band from near-infrared to mid-infrared and achieves an ultra-wide RI detection range and ultra-high wavelength sensitivity. The sensor has a wide application prospect in the fields of chemical detection, biomedical sensing, and water environment monitoring.

High-sensitivity photonic crystal fiber sensor based on surface plasmon resonance

Double-sided photonic crystal fiber (PCF) temperature and refractive index (RI) sensor based on surface plasmon resonance (SPR)

Simultaneous Sensing of Temperature and Refractive Index with D-Shaped Photonic Crystal Fiber Infused with Liquid Crystal

A novel photonic crystal fiber refractive index sensor with ultra wide detection range based on surface plasmon resonance effect

A High Sensitivity Refractive Index Sensor Based on Microstructure Fiber with Simple Structure and SPR Effect

Refractive index sensing characteristics of PCF-SPR based on dual-plasmon materials

A Highly Sensitive D-Shaped PCF-SPR Sensor for Refractive Index and Temperature Detection

Numerical Analysis of Highly Sensitive Twin-Core, Gold-Coated, D-Shaped Photonic Crystal Fiber Based on Surface Plasmon Resonance Sensor

High-Sensitivity Refractive Index Sensor with Dual-Channel Based on Surface Plasmon Resonance Photonic Crystal Fiber

Modified D-type surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) for application as a polarization filter and refractive index sensor

A novel D-shaped photonic crystal fiber refractive index sensor based on surface plasmon resonance effect

High sensitivity and wide detection range temperature and refractive index photonic crystal fiber sensor

Compact Three-Channel Photonic Crystal Fiber Sensor Based on Surface Plasmon Resonance

Surface plasmon resonance sensor based on coupling effects of dual photonic crystal fibers for low refractive indexes detection

Design and Analysis of Surface Plasmon Resonance Sensor with Open-Loop Side-Polished Photonic Crystal Fiber

Double U-groove temperature and refractive index photonic crystal fiber sensor based on surface plasmon resonance

Refractive index sensing and filtering characteristics of micro-channels photonic crystal fiber

D-shaped photonic crystal fiber plasmonic refractive index sensor based on gold grating

High-sensitivity Refractive Index Sensor of Arc-shape Photonic Crystal Fiber Based on Surface Plasmon Resonance

Theoretical assessment of a highly sensitive photonic crystal fibre based on surface plasmon resonance sensor operating in the near-infrared wavelength

Dual-Side Polished Surface Plasmon Resonance–Based Photonic Crystal Fiber for Refractive Index Sensing and Polarization Filtering