Abstract:The paper proposed and studied a Mach-Zehnder mode interferometric refractive index sensor, which is based on splicing points tapered SMF-PCF-SMF (SMF, single-mode fiber; PCF, photonic crystal fiber) structure. For the reason that the effective refractive index of photonic crystal fiber cladding high-order modes near fiber core are more sensitive to surrounding refractive index changes, the refractive index measurement sensitivity of splicing points tapered SMF-PCF-SMF Mach-Zehnder mode interferometer can be enhanced further through tapering the splicing points. Relations between refractive index measurement sensitivity and photonic crystal fiber length and taper waist diameter are studied through numerical simulations and experiments. Simulation and experimental results show that sensitivity will be increased with the increase of photonic crystal fiber length and the decrease of taper waist diameter. In the refractive range of 1.3333-1.3737, splicing points tapered SMF-PCF-SMF Mach-Zehnder mode interferometer with PCF length of 4 cm and taper waist diameter of 60.4 mu m has refractive index measurement sensitivity of 260.8 nm/RIU, compared with sensitivity of 224.2 nm/RIU of direct splicing SMF-PCF-SMF Mach-Zehnder mode interferometer with PCF length of 4 cm, the sensitivity increased by 16.3%. The research shows that the sensing structure is with good linearity and repeatability. (C) 2015 Elsevier B.V. All rights reserved.

Miniature tapered photonic crystal fiber interferometer with enhanced sensitivity by acid microdroplets etching.

Tapered Photonic Crystal Fiber Interferometer with Enhanced Sensitivity

Ultra-Sensitive Refractive Index Sensor with Slightly Tapered Photonic Crystal Fiber

Miniature In-Line Photonic Crystal Fiber Etalon Fabricated by 157 Nm Laser Micromachining

Refractive Index Sensor Based on S-Tapered Photonic Crystal Fiber

S-Tapered Photonic Crystal Fiber Interferometers for Refractive Index Sensing

Miniaturized Metal-Dielectric-Hybrid Fiber Tip Grating for Refractive Index Sensing

Refractive index sensing and filtering characteristics of micro-channels photonic crystal fiber

A Tiny In-Line Coupler Tip With the Half Tapered Dual-Core Photonic Crystal Fibre

A Novel Photonic Crystal Fiber Mach–Zehnder Interferometer for Enhancing Refractive Index Measurement Sensitivity

Photonic crystal fibers tapering based on the conventional taper rig

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

Photonic Crystal Cavities in Microfibers with Modest Finesse and Wavelength Scale Mode Volume

High Sensitivity Refractive Index Sensor Based on Splicing Points Tapered Smf-Pcf-Smf Structure Mach-Zehnder Mode Interferometer

Temperature Sensor Based on an Isopropanol-Sealed Photonic Crystal Fiber In-Line Interferometer with Enhanced Refractive Index Sensitivity

CO<sub>2</sub> Laser Tapering of Intrinsic Fabry-Perot Interferometers for Sensing

Micro Fiber-Optic Fabry-Perot Interferometer Fabricated by Chemical Etching of Er-doped Fiber

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

A Miniature Extrinsic Fabry-Pérot Interferometer Strain Sensor Based on Hollow-Core Photonic Crystal Fiber

Four-wave Mixing-Based Photonic Crystal Fiber Microfluid Sensor with Embedded U-shape Microslits

Versatile Interferometric Sensor Based on Sandwiched Grapefruit Photonic Crystal Fiber