Abstract:We proposed a fiber taper based on the Fabry-Perot (FP) interferometer structure with controllable temperature sensitivity. The FP interferometer is formed by inserting a segment of tapered fiber tip into the capillary and subsequently splicing the other end of the capillary to a single-mode fiber (SMF), the tapered fiber endface, and the spliced face form the FP cavity. Through controlling the inserted tapered fiber length, a series of FP interferometers were made. Because the inserted taper tip has the degree of freedom along the fiber axial, when the FP interferometer is subjected to temperature variation, the thermal expansion of the fiber taper tip will resist the FP cavity length change caused by the evolution of capillary length, and we can control the temperature sensitivity by adjusting the inserted taper length. In this structure, the equivalent thermal expansion coefficient of the FP interferometer can be defined; it was used to evaluate the temperature sensitivity of the FP interferometer, which provides an effective method to eliminate the temperature effect and to enhance other measurement accuracy. We fabricated the FP interferometers and calibrated their temperature characters by measuring the wavelength shift of the resonance dips in the reflection spectrum. In a temperature range of 50 degrees C to 150 degrees C, the corresponding temperature sensitivities can be controlled between 0 and 1.97 pm/degrees C when the inserted taper is between 75 and 160 mu m. Because of its controllable temperature sensitivity, ease of fabrication, and low cost, this FP interferometer can meet different temperature sensitivity requirements in various application areas, especially in the fields which need temperature insensitivity. (C) 2015 Optical Society of America

Ultra-small Fiber Taper Fabry-Perot Modal Interferometer

Miniaturized fiber taper reflective interferometer for high temperature measurement.

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Compact fiber tip modal interferometer for high-temperature and transverse load measurements.

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Spheroidal Fabry-Perot microcavities in optical fibers for high-sensitivity sensing

Fiber Fabry-Perot Interferometer with Controllable Temperature Sensitivity

Miniature All-Fiber Fabry-Perot Interferometer

Miniature Fabry-Perot interferometric sensor for temperature measurement based on photonic crystal fiber

Polymer Microbubble-Based Fabry–Perot Fiber Interferometer and Sensing Applications

High-sensitivity Double-Parameter Sensor Based on the Fibre-Tip Fabry–Pérot Interferometer

Microfiber Fabry-Perot interferometer used as a temperature sensor and an optical modulator

Fiber tip high temperature sensor

Single S-Tapered Fiber Mach-Zehnder Interferometers

Ultra-Sensitive Refractive Index Sensor with Slightly Tapered Photonic Crystal Fiber

Tapered Photonic Crystal Fiber Interferometer with Enhanced Sensitivity

Micro-Tapered Fiber Few-Mode Interferometers Incorporated by Molecule Self-Assembly Fiber Grating for Temperature Sensing Applications

Cavity-length controllable Fabry–Perot interferometer based on Vernier effect

Fabry–Perot interferometer fiber tip sensor based on a glass microsphere glued at the etched end of multimode fiber

Ultra-High-Sensitivity, Miniaturized Fabry-Perot Interferometric Fiber-Optic Microphone for Weak Acoustic Signals Detection

Multimode fiber Fabry-Perot interferometer tip sensor