Abstract:A high-sensitivity interferometric optical microfiber sensor based on liquid cladding is proposed to detect liquid samples temperatures in special environments. The sensor is manufactured by arc discharge and flame-brushing technology and is encapsulated in a capillary tube and covered with deionized water. The sensor is more susceptible to the influence of the external environment due to the strong evanescent field on the tapered fiber surface. High-sensitivity measurement near room temperature is important, which can be used for effective diagnosis and treatment of local temperature of biological tissues in the field of biosensing. Compared with the silica material, the sensor based on liquid encapsulation has a larger thermo-optical coefficient, and the difference between the thermo-optic coefficient of water and the optical fiber is greater. The results show that with increasing ambient temperature, the wavelength of the transmission spectrum shifts towards shorter wavelengths. The device without liquid packaging has a temperature sensitivity of −57 pm/°C, and the liquid-encapsulated microfiber can reach −415 pm/°C ranging from 30-50 °C, which is 7<sup>+</sup> times higher than the former. In addition to improving the temperature sensitivity of the sensor, the water cladding can protect the microfiber from damage. This sensor can be used as a basic sensing unit in remote and intelligent optical fiber sensor networks with great application potential in marine environment monitoring, biomedicine diagnosis and chemical reaction research.

Ultrasensitive Temperature Sensor Based on Refractive Index Liquid-Sealed Thin-Core Fiber Modal Interferometers

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Temperature Sensor Based on an Isopropanol-Sealed Photonic Crystal Fiber In-Line Interferometer with Enhanced Refractive Index Sensitivity

Liquid Seal for Temperature Sensing with Fiber-Optic Refractometers

A Highly Sensitive Temperature Sensor Based on A Liquid-Sealed S-Tapered Fiber

Hybrid Fabry-Perot Interferometer for Simultaneous Liquid Refractive Index and Temperature Measurement

Folded-tapered multimode-no-core fiber sensor for simultaneous measurement of refractive index and temperature

Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Fiber-optic sensor tip for measuring temperature and liquid refractive index

Ultrasensitive Temperature Sensor Based on an Isopropanol-Sealed Optical Microfiber Taper

Highly Sensitive Optical Fiber Temperature Sensor Based on the Thermal Shift of the Liquid–air Interface

Fiber Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on Internal-and- External-Cavity Fabry–Pérot Interferometer Configuration

Two-core photonic crystal fiber with selective liquid infiltration in the central air hole for temperature sensing

Simultaneous and Ultrasensitive Measurement of Refractive Index and Temperature Based on SPR of Hollow-Core Anti-resonant Fibers

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

An Inline Ultrasensitive Temperature Sensor Based on Liquid-Filled Photonic Crystal Fiber Mach-Zehnder Modal Interferometer

Optical Fiber Sensor Based on Capillary Wall for Highly-Sensitive Refractive Index Measurement

Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity