Abstract:A high-sensitivity interferometric optical microfiber sensor based on liquid cladding is proposed to detect liquid samples temperatures in special environments. The sensor is manufactured by arc discharge and flame-brushing technology and is encapsulated in a capillary tube and covered with deionized water. The sensor is more susceptible to the influence of the external environment due to the strong evanescent field on the tapered fiber surface. High-sensitivity measurement near room temperature is important, which can be used for effective diagnosis and treatment of local temperature of biological tissues in the field of biosensing. Compared with the silica material, the sensor based on liquid encapsulation has a larger thermo-optical coefficient, and the difference between the thermo-optic coefficient of water and the optical fiber is greater. The results show that with increasing ambient temperature, the wavelength of the transmission spectrum shifts towards shorter wavelengths. The device without liquid packaging has a temperature sensitivity of −57 pm/°C, and the liquid-encapsulated microfiber can reach −415 pm/°C ranging from 30-50 °C, which is 7<sup>+</sup> times higher than the former. In addition to improving the temperature sensitivity of the sensor, the water cladding can protect the microfiber from damage. This sensor can be used as a basic sensing unit in remote and intelligent optical fiber sensor networks with great application potential in marine environment monitoring, biomedicine diagnosis and chemical reaction research.

Ultrasensitive Temperature Sensor Based on an Isopropanol-Sealed Optical Microfiber Taper

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A Temperature Sensor Based on Optical Microfiber Knot Resonator

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

Ultrasensitive Temperature Sensor Based on Refractive Index Liquid-Sealed Thin-Core Fiber Modal Interferometers

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

A Highly Sensitive Temperature Sensor Based on A Liquid-Sealed S-Tapered Fiber

Temperature Sensor Based on an Isopropanol-Sealed Photonic Crystal Fiber In-Line Interferometer with Enhanced Refractive Index Sensitivity

A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

Ultrasensitive and Multifunction Plasmonic Temperature Sensor with Ethanol-Sealed Asymmetric Ellipse Resonators

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Ultrasensitive temperature sensor based on a urethane acrylate-coated off-axis spiral long period fiber grating

Highly Sensitive Optical Fiber Temperature Sensor Based on the Thermal Shift of the Liquid–air Interface

Ultrasensitive RI and temperature sensor based on cascaded microfiber MZIs with Vernier effect

Thermo-Optic Property Measurement Using Surface Plasmon Resonance-Based Fiber Optic Sensor

Miniaturized fiber taper reflective interferometer for high temperature measurement.

Silicone rubber coated non-adiabatic tapered fiber combined with online Vernier interferometer for temperature detection

Miniature End-Capped Fiber Sensor for Refractive Index and Temperature Measurement

An Optical Microfiber Taper Magnetic Field Sensor with Temperature Compensation

Liquid Seal for Temperature Sensing with Fiber-Optic Refractometers

Large-Range, Highly-Sensitive, and Fast-Responsive Optical Fiber Temperature Sensor Based on the Sealed Ethanol in Liquid State Up to Its Supercritical Temperature