A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

Shuangshuang Wang,Yinping Miao,Chengwei Fei,Hongmin Zhang,Bin Li

DOI: https://doi.org/10.1109/jsen.2020.3037722

IF: 4.3

2021-03-01

IEEE Sensors Journal

Abstract:A high-sensitivity interferometric optical microfiber sensor based on liquid cladding is proposed to detect liquid samples temperatures in special environments. The sensor is manufactured by arc discharge and flame-brushing technology and is encapsulated in a capillary tube and covered with deionized water. The sensor is more susceptible to the influence of the external environment due to the strong evanescent field on the tapered fiber surface. High-sensitivity measurement near room temperature is important, which can be used for effective diagnosis and treatment of local temperature of biological tissues in the field of biosensing. Compared with the silica material, the sensor based on liquid encapsulation has a larger thermo-optical coefficient, and the difference between the thermo-optic coefficient of water and the optical fiber is greater. The results show that with increasing ambient temperature, the wavelength of the transmission spectrum shifts towards shorter wavelengths. The device without liquid packaging has a temperature sensitivity of −57 pm/°C, and the liquid-encapsulated microfiber can reach −415 pm/°C ranging from 30-50 °C, which is 7⁺ times higher than the former. In addition to improving the temperature sensitivity of the sensor, the water cladding can protect the microfiber from damage. This sensor can be used as a basic sensing unit in remote and intelligent optical fiber sensor networks with great application potential in marine environment monitoring, biomedicine diagnosis and chemical reaction research.

engineering, electrical & electronic,instruments & instrumentation,physics, applied

What problem does this paper attempt to address?

This paper aims to address the issue of high-sensitivity temperature measurement of liquid samples in special environments. Specifically, the study proposes a temperature sensor based on a liquid-clad micro-fiber interferometer to detect sample temperatures in biomedical research. The sensor is fabricated using arc discharge and flame brushing techniques and is encapsulated in a capillary filled with deionized water. Due to the strong evanescent field on the micro-fiber surface, the sensor is more sensitive to changes in the external environment.

Compared to traditional quartz materials, the liquid cladding has a larger thermo-optic coefficient, significantly enhancing the sensor's temperature sensitivity. Experimental results show that in the range of 30-50°C, the temperature sensitivity of the unencapsulated sensor is −57 pm/°C, while the temperature sensitivity of the liquid-clad micro-fiber sensor reaches −415 pm/°C, an improvement of more than 7 times. Additionally, the liquid cladding not only improves temperature sensitivity but also protects the micro-fiber from damage and contamination.

This type of sensor can serve as a fundamental unit of remote intelligent fiber optic sensing networks, with broad application potential in fields such as marine environmental monitoring, biomedical diagnostics, and chemical reaction research.