Abstract:The optical fiber Fabry-Perot interferometer (FPI) has been widely investigated as a potential temperature sensor. To function as a temperature sensor, the cavity of the FPI is typically constructed from either silica fibers or polymers. The silica cavity FPIs can function at temperatures exceeding 1000°C. However, its temperature sensitivity is constrained by its relatively low thermal optical coefficient and thermal expansion of silica materials. Although the polymer cavity FPI exhibits a high temperature sensitivity, its cavity is susceptible to deterioration in high-temperature environments. Here, to overcome this challenge and achieve high-sensitivity temperature sensing in a high-temperature environment, we propose a new type of temperature FPI sensor by inserting and sealing a section of Cr20Ni80 metal microwire inside a section of silica hollow core fiber (HCF) spliced to standard single-mode fiber (SMF). The FPIs exhibit a high degree of temperature sensitivity due to the high thermal expansion of the Cr20Ni80 metal microwire. Since the Cr20Ni80 metal has a high melting temperature of 1400°C, such FPIs can function in high-temperature environments. Moreover, the temperature sensitivity of this FPI can be modified without affecting its reflection spectrum by changing the length of the metallic microwire situated within the hollow core fiber. The experimental results indicate that the proposed FPIs exhibit a temperature sensitivity greater than -0.35nm/°C within the temperature range of 50°C to 440°C. Our proposed metal microwire-based FPIs are economical, robust, simple to fabricate, and capable of functioning in high-temperature environments, rendering them appealing options for practical applications

Temperature Characterization of Thin-Walled-microsphere Air-Cavity Fiber Sensing Structures

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Research on high-temperature characteristics of a miniature Fabry-Pérot cavity acoustic sensor.

An Anti-Jamming High-Temperature Sensor Based on Optical Fiber In-Line Mach–Zehnder Interferometer Structure

Fabry-Perot Interferometric High-Temperature Sensing Up To 1200 Degrees C Based On A Silica Glass Photonic Crystal Fiber

Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement

A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

High-Temperature Sensor Based on Fabry-Perot Interferometer in Microfiber Tip

Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

High temperature microstructured fiber sensor based on a partial-reflection-enabled intrinsic Fabry-Perot interferometer.

High-Sensitivity Mach–Zehnder Interferometric Temperature Fiber Sensor Based on a Waist-Enlarged Fusion Bitaper

Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity

Sensitivity adjustable in-line high-temperature sensor based on metal microwire optical Fabry-Perot interferometer

Optical Fiber Temperature Sensor Based on PDMS-Filled Air-Cavity Fabry–Perot Structure

High temperature and high pressure fiber microsphere Fabry–Perot sensor based on Vernier effect and FBG

Miniaturized fiber taper reflective interferometer for high temperature measurement.

A temperature sensor based on multi-beam capture and interference