Abstract:In this letter, a refractive index sensing system is proposed and experimentally demonstrated. Acting as the sensing head, the no-core fiber spliced with two sections of single-mode fiber (SNS) is fabricated to form a fiber ring laser (FRL). The measured salt water changes the self-imaging wavelength of the NCF as well as the central wavelength of the FRL. After that, the light is introduced into the dual-loop optoelectronic oscillator (OEO). With the help of the dispersion compensation module in the OEO loop, the wavelength change is mapped into the frequency shift of the generated microwave signal. Hence, the RI of the measured liquid can be recovered by tracking the frequency change. Both the simulation analysis and the proof of concept experiment are performed. Results show that both the central wavelength of the FRL and the microwave signal increase exponentially with the increased RI, agreeing with the simulated analysis. In the range of 1.33-1.38, the linear fitting results manifest that the sensitivities of central wavelength change vs. RI and microwave signal shift vs. RI are 87.70 nm/RIU and 83.89 MHz/RIU, the corresponding resolutions are and , respectively. The proposed method shows potential for realizing high sensitivity, fast, and real-time RI measuring.

Highly Sensitive Refractive Index Sensor Based on a Cladding-Etched Thin-Core Fiber Sandwiched Between Two Single-Mode Fibers

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Refractive index sensor based on ultrafine tapered single-mode nocladding single-mode fiber structure

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

Optical fiber refractive index sensor based on the double cladding fiber

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

High-sensitivity refractive index sensor with tunable detection range based on dual-core resonance effect in gold-coated photonic crystal fibers

Optical Fiber Sensor Based on Capillary Wall for Highly-Sensitive Refractive Index Measurement

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

High sensitivity refractive index sensor based on tilted fiber Bragg gratings

High Sensitivity Evanescent Field Refractometer Based on Modal Interference in Micro-Capillary Wall

Refractive index sensors based on the fused tapered special multi-mode fiber

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

High-sensitivity Refractive Index Sensor of Arc-shape Photonic Crystal Fiber Based on Surface Plasmon Resonance

Miniature Single-Mode Fiber Refractive Index Interferometer Sensor Based on High Order Cladding Mode and Core-Offset

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Sensitive refractive index sensor based on an assembly-free fiber multi-mode interferometer fabricated by femtosecond laser

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber