Abstract:The present study proposes and experimentally verifies a refractive index (RI) sensor with high sensitivity and simple structure based on multimode Mach-Zehnder interference (MZI), in which a suspend-core fiber (SCF) fused with single-mode fibers (SMFs) at both ends worked as the sensing unit. Femtosecond laser is used to process SCF, forming microfluidic channels for liquid in and out, and then encapsulation is conducted to enhance mechanical characteristics of the MZI sensor. By analyzing simulation and experimental results, it has been confirmed that the multimode MZI arises from the effective RI difference between the fundamental mode and the higher-order modes of the SCF core induced by RI variations of external environment. This study involves the preparation and testing of three sensors with varying SCF lengths. As the external RI varies in range of 1.3333 to 1.3472, all sensors exhibit sensitivities at a comparable level. This observation aligns well with the theoretical analysis, indicating that fiber length does not have direct impact on the sensing performance. The maximum sensitivity was 1825.41 nm/RIU. The three sensors undergo tests to assess their repeatability and stability, revealing a maximum wavelength error of 0.1975 nm for repeatability and 0.18 nm for stability. In addition, the temperature sensitivity within the range of 20-100 °C is found to be as low as 0.00667 nm/°C, indicating that the potential impact of temperature-induced wavelength shift can be disregarded. The sensor exhibits high sensitivity, excellent repeatability and stability, promising extensive application in diverse fields including biology, chemistry, medicine, and environmental monitoring.

An Ultra-Low Loss Balloon-Type Single Stress-Applying Optical Fiber Refractive Index Sensor

Optofluidic Refractive Index Sensor Based on Partial Reflection

High Sensitivity Balloon-Like Refractometric Sensor Based on Singlemode-Tapered Multimode-Singlemode Fiber

A Macrobending Singlemode Fiber Refractive Index Sensor for Low Refractive Index Liquids

Balloon-like Singlemode-Tapered Multimode-Singlemode Fiber Structure for Refractive Index Sensing

High Sensitivity Balloon-Like Interferometer for Refractive Index and Temperature Measurement

A Simple High-Sensitivity Sensor Based on Multimode Mach-Zehnder Interference for Refractive Index Measurement

A Differential Intensity-Modulated Refractive Index Sensor Using a Droplet-Like Fiber Cascaded With FBGs

Refractive index sensor based on ultrafine tapered single-mode nocladding single-mode fiber structure

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

Refractive index sensors based on the fused tapered special multi-mode fiber

Refractive Index Sensor Based On Twisted Tapered Plastic Optical Fibers

Fiber-Optic Refractive Index Sensor Based on Multi-Tapered SMS Fiber Structure

Ultrasensitive Refractive Index Sensor Based on Mach–Zehnder Interferometer and a 40μm Fiber

Refractive index sensor with asymmetrical fiber Mach-Zehnder interferometer based on concatenating single-mode abrupt taper and core-offset section

Intensity Modulation based U shaped Plastic Optical Fiber Refractive Index Sensor

Optical Fiber Refractive Index Sensor with Low Detection Limit and Large Dynamic Range Using a Hybrid Fiber Interferometer

Highly Sensitive Refractive Index Optical Fiber Sensors Fabricated by a Femtosecond Laser

Enhancement of Ri Sensitivity Through Bending A Tapered-Smf-Based Balloon-Like Interferometer

Refractive Index Sensor Based on Double Side-Polished U-Shaped Plastic Optical Fiber

Fiber optic hybrid structure based on an air bubble and thin taper for measurement of refractive index, temperature, and transverse load