Abstract:A highly sensitive fiber-optic refractive index (RI) sensor with low-temperature cross-sensitivity is proposed and demonstrated. The RI sensitivity of Mach–Zehnder interferometer (MZI), which is generated by the optical path difference (OPD) between HE11 and HE12 modes in tapered microfiber, can be theoretically improved to by operating at the dispersion turning point (DTP), but limited by the narrow free spectral range (FSR) and fragile sensor structure as the waist diameter is less than at DTP. To solve the problem of fragile sensor structure and difficulty in micromachining of traditional tapered microfiber working at the DTP, the Vernier effect is introduced by cascading two microfiber MZIs with larger diameters of about . The RI sensitivity can be amplified reaching 46467 nm/RIU with temperature cross-sensitivity only RIU/°C in the aqueous solution. Moreover, the magnification factor M can be adjusted desirably as the RI sensitivity and FSR of single MZI can be adjusted by changing the waist diameter and the waist length; then, the RI sensitivity can be improved further exceeding 106 nm/RIU, which is the highest of all the fiber-optic RI sensors to the best of our knowledge. The proposed RI sensor with ultrahigh sensitivity, and robust and reliable structure shows great significance for biochemical trace detection, such as slight RI variations caused by small biological molecules or extremely low concentration biological samples.

Fiber optic hybrid structure based on an air bubble and thin taper for measurement of refractive index, temperature, and transverse load

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Hybrid Fabry-Perot Interferometer for Simultaneous Liquid Refractive Index and Temperature Measurement

Fiber Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on Internal-and- External-Cavity Fabry–Pérot Interferometer Configuration

Refractive index sensors based on the fused tapered special multi-mode fiber

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

Optical Fiber Sensor Based on Capillary Wall for Highly-Sensitive Refractive Index Measurement

Balloon-like Singlemode-Tapered Multimode-Singlemode Fiber Structure for Refractive Index Sensing

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements.

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach–Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect

Sensitivity Enhanced Refractive Index Sensor With In-Line Fiber Mach-Zehnder Interferometer Based on Double-Peanut and Er-Doped Fiber Taper Structure

Temperature compensated highly sensitive refractive index sensor based on Mach-Zehnder interferometer and FBG

Fiber-optic sensor tip for measuring temperature and liquid refractive index

An Optical Sensor Designed From Cascaded Anti-Resonant Reflection Waveguide and Fiber Ring-Shaped Structure for Simultaneous Measurement of Refractive Index and Temperature

Folded-tapered multimode-no-core fiber sensor for simultaneous measurement of refractive index and temperature

High Sensitivity Balloon-Like Interferometer for Refractive Index and Temperature Measurement

An Optical Fiber Refractive Index Sensor Based On The Hybrid Mode Of Tamm And Surface Plasmon Polaritons

Refractive Index Sensor Using Microfiber-Based Mach-Zehnder Interferometer