Abstract:In this article, an in-line Mach-Zehnder interferometer (ILMZI)-based temperature sensor of a sandwich-like composite structure was proposed and experimentally demonstrated. Using simple cleaving and splicing operations, ILMZI was formed by compactly sandwiching a section of four-hole microstructure optical fiber (FHMF) of ultrashort length between two segments of multimode fibers and single-mode fibers in turn. Due to the large thermo-optic coefficient difference between the silica and air modes in FHMF, the sensor achieves a comparable sensitivity of 67.29 pm/degrees C over a wide dynamic range of 20.8 degrees C-100.4 degrees C. Because the sensing area length is only a few hundred micrometers, the long-term stability and anti-interference of the sensor are greatly enhanced. In addition, the large airhole design confines the propagation mode in silica medium by total internal reflection, reducing the interaction between the liquid sample and the sensing element, making the sensor inert to the ambient refractive index. The maximum response deviation of the sensor under microvibration disturbances is 3.51 x 10(-4) nm/degrees C, and the maximum cross-sensitivity under strain disturbances is only 0.0018 degrees C/mu epsilon. The proposed sensor is excellent in performance, easy in fabrication, simple in structure, and low in cost, which can be expected to be used in practical temperature sensing applications without any additional packaging.

Temperature compensated highly sensitive refractive index sensor based on Mach-Zehnder interferometer and FBG

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Simultaneous measurement of temperature and refractive index based on a core-offset Mach-Zehnder interferometer cascaded with a long-period fiber grating

Ultrasensitive RI and temperature sensor based on cascaded microfiber MZIs with Vernier effect

Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach–Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

Research on High Sensitive Refractive Index Sensor Based on D-Single Mode Fiber

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Large measurement range and high sensitivity temperature sensor with FBG cascaded Mach-Zehnder interferometer

Fiber Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on Internal-and- External-Cavity Fabry–Pérot Interferometer Configuration

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Detection of Refractive Index With a Temperature-Compensated MZI-Based Optical Sensor Using Few-Mode Fiber

Core-Offset-Based Fiber Bragg Grating Sensor for Refractive Index and Temperature Measurement

Tapered Fiber-Optic Mach-Zehnder Interferometer for Ultra-High Sensitivity Measurement of Refractive Index

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

Optical Fiber Sensor Based on Capillary Wall for Highly-Sensitive Refractive Index Measurement

An Optical Sensor Designed From Cascaded Anti-Resonant Reflection Waveguide and Fiber Ring-Shaped Structure for Simultaneous Measurement of Refractive Index and Temperature