Abstract:An all-fiber strain sensor based on the few-mode fiber (FMF) hybrid construction is proposed and experimentally demonstrated to solve the problem of cross-sensitivity between strain and temperature. The proposed sensor is constructed by three pieces of FMFs that are the dislocation fusion structure. The strain sensitivity of the sensor is analyzed by the wavelength shift and light intensity. According to the wavelength shift analysis, experimental results show that the strain sensitivity of the proposed sensor is-3.13 pm/p epsilon and-2.85 pm/p epsilon at the wave-length of resonance peaks dipA and dipB in the strain range from 0 to 700 p epsilon. Meanwhile, the wavelengths of resonance peaks dipA and dipB show few wavelengths shift in the temperature range of 20-60 C, which pro-vides the possibility for the proposed sensor in strain sensing applications without cross-sensitivity under a temperature range of 20-60 C. According to the light intensity analysis, we find that there is a linear relationship between the amplitude of the spatial frequency spectrum and strain variation, and the amplitude decreases with the increase of strain at 0.026 nm(-1) and 0.045 nm(-1). The strain sensitivity is-0.0003 a.u./p epsilon at 0.026 nm(-1) and-0.0004 a.u./p epsilon at 0.045 nm(-1), and there is no spatial frequency shift as the strain increases. Very importantly, the duplicate sensor keeps the same strain and temperature characteristics that suggests excellent fabrication repeatability of the proposed sensor. From the aspects of practicality and performance, the proposed strain sensor is not only easy to construct but also temperature insensitive. These advantages make the proposed strain sensor very promising in practical sensing applications under different temperatures.

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Highly Sensitive Strain Sensor Based on Tapered Few-Mode Fiber.

Highly Sensitive Strain Sensor Based on a Hollow-Core Fibre Embedded SMS Fibre Structure

Highly Sensitive Strain Sensor Based on Composite Interference Established Within S-tapered Multimode Fiber Structure.

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

A Dual-Parameter Fiber Sensor Based on Few-Mode Fiber and Fiber Bragg Grating for Strain and Temperature Sensing

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

An asymmetric spherical-shape structure strain sensor based on few mode fiber

Strain Sensor Based on Modal Interference of Polarization Maintaining Fiber

Simultaneous Strain and Temperature Sensor Based on Polarization Maintaining Fiber and Multimode Fiber

All-Fiber Fabry-Perot Micro-cavity Temperature-Insensitive Sensor for Strain Sensing Based on T-shaped Structure

Photonic crystal fiber strain sensor based on multimode/air spherical cavity structure

Fiber strain sensor based on compact in-line air cavity fabricated by conventional single mode fiber

Temperature-Insensitive Strain Sensor Based on Few-Mode Fiber

A Simple Strain Sensor Using Polymer Fiber Bragg Grating and Long-Period Fiber Grating

Optical Fiber Core Diameter Mismatched In-Fiber Mach-Zehnder Interferometer for Strain Sensing

Long-Sensing-Length Strain Sensor Based on Optical Fiber Fabry-Perot Interferometer with HCF-SMF Structure

Dual-parameter Fiber Sensor for Temperature and Strain Based on SMS-FP Composite Structure

Optical Modal Interferometer Fiber Strain Sensor Based on Waist-Enlarge Fusion Splicing

Few-mode Fiber Multi-Parameter Sensor with Distributed Temperature and Strain Discrimination.

Optical Fiber Sensor with a Lateral-Offset Structure Assisted by Virtual Vernier Effect for Stretching Strain Measurement