Abstract:A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on the core diameter, numerical aperture (NA), and the length of the MMF section in the single-mode--multimode--single-mode (SMS) fiber structure are investigated experimentally. The results indicate that the larger core diameter of the MMF leads to higher temperature sensitivity but lower strain sensitivity (absolute values); the higher NA does not influence the temperature sensitivity but results in higher absolute value of strain sensitivity; the longer MMF section brings lower temperature sensitivity but does not have an impact on strain sensitivity. These findings also contribute to the theoretical analysis of the length dependence in the SMS fiber sensors. Besides, the results of the characterization study show that the strain sensitivity is relatively low, which brings a possibility to develop a strain-insensitive temperature sensor. The proposed sensor is used for temperature sensing while the strain is constantly applied from 0 to 1100 $\mu\epsilon$ with steps of 100 $\mu\epsilon$. The measured results are consistent with the comprehensive study. The mean temperature sensitivity is 6.14 pm/$^{\circ}$C with a standard deviation of 0.39 pm/$^{\circ}$C, which proves that the proposed temperature sensor exhibits good stability and is insensitive to strain. We expect that these results will provide a profound guideline to fiber sensors based on multimode interference.

A strain sensor based on in-line Mach-Zehnder interferometer with thin-core fiber

Optical Fiber Strain and Temperature Sensor Based on an In-Line Mach–Zehnder Interferometer Using Thin-Core Fiber

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

Ultrasensitive Strain Sensor Based on Mach-Zehnder Interferometer with Bent Structures

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

An in-fiber Mach–Zehnder strain sensor for studying multimode interference of light

An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing

A Novel MZI Fiber Sensor with Enhanced Curvature and Strain Sensitivity Based on Four-Core Fiber

Photonic crystal fiber strain sensor based on multimode/air spherical cavity structure

Highly sensitive strain sensing using a polarization-maintaining photonic crystal fibre based Mach–Zehnder interferometer

ALLOMETRIC EXPONENTS SUPPORT A 3/4-POWER SCALING LAW

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

Temperature and Strain Sensor Based on a Few-Mode Photonic Crystal Fiber

In-Fiber Mach-Zehnder Interferometer Exploiting a Micro-Cavity For Strain and Temperature Simultaneous Measurement

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

High Sensitivity Fiber-Optic Strain Sensor Based on Modified Microfiber-Assisted Open-Cavity Mach-Zehnder Interferometer

High-Sensitivity Microfiber Strain and Force Sensors