Abstract:An all-fiber strain sensor based on the few-mode fiber (FMF) hybrid construction is proposed and experimentally demonstrated to solve the problem of cross-sensitivity between strain and temperature. The proposed sensor is constructed by three pieces of FMFs that are the dislocation fusion structure. The strain sensitivity of the sensor is analyzed by the wavelength shift and light intensity. According to the wavelength shift analysis, experimental results show that the strain sensitivity of the proposed sensor is-3.13 pm/p epsilon and-2.85 pm/p epsilon at the wave-length of resonance peaks dipA and dipB in the strain range from 0 to 700 p epsilon. Meanwhile, the wavelengths of resonance peaks dipA and dipB show few wavelengths shift in the temperature range of 20-60 C, which pro-vides the possibility for the proposed sensor in strain sensing applications without cross-sensitivity under a temperature range of 20-60 C. According to the light intensity analysis, we find that there is a linear relationship between the amplitude of the spatial frequency spectrum and strain variation, and the amplitude decreases with the increase of strain at 0.026 nm(-1) and 0.045 nm(-1). The strain sensitivity is-0.0003 a.u./p epsilon at 0.026 nm(-1) and-0.0004 a.u./p epsilon at 0.045 nm(-1), and there is no spatial frequency shift as the strain increases. Very importantly, the duplicate sensor keeps the same strain and temperature characteristics that suggests excellent fabrication repeatability of the proposed sensor. From the aspects of practicality and performance, the proposed strain sensor is not only easy to construct but also temperature insensitive. These advantages make the proposed strain sensor very promising in practical sensing applications under different temperatures.

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Strain-insensitive High-Sensitivity Temperature Sensing Based on Multimode Interference in a Square-Core Fiber

Core Diameter and Numerical Aperture Dependences on the Performance of Fiber-Optic Multimode Interference Sensing

Strain-insensitive Twist and Temperature Sensor Based on Seven-Core Fiber

Optical Fiber Sensor for Temperature and Strain Measurement Based on Multimode Interference and Square-Core Fiber

Temperature-Insensitive Strain Sensor Based on Few-Mode Fiber

Temperature-independent Strain Sensor Based on a Core-Offset Multimode Fiber Interferometer

Strain-Insensitive Temperature Sensor Based on Few-Mode Fiber and Photonic Crystal Fiber

Dual-parameter Fiber Sensor for Temperature and Strain Based on SMS-FP Composite Structure

Optical Fiber Core Diameter Mismatched In-Fiber Mach-Zehnder Interferometer for Strain Sensing

Sensitivity-enhanced Fiber Optic Temperature Sensor with Strain Response Suppression

Characterization of temperature and strain sensitivity of low cost few-mode fiber based interferometer sensor

Strain-insensitive Temperature Sensor Based on a Few-Mode Dual-Concentric-core Fiber

Temperature and strain simultaneous sensing measurement based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating

Studies on Temperature and Strain Sensitivities of a Few-Mode Critical Wavelength Fiber Optic Sensor

A Strain Insensitive Temperature Sensor Based on In-fiber Integrated Multipath Interferometer

Strain-insensitive and high temperature fiber sensor based on a Mach-Zehnder modal interferometer

Temperature and Strain Sensor Based on a Few-Mode Photonic Crystal Fiber

A highly sensitive strain fiber sensor based on waved core structure

Optical Fiber Strain and Temperature Sensor Based on an In-Line Mach–Zehnder Interferometer Using Thin-Core Fiber