Abstract:An ultrahigh sensitivity sensor for temperature and strain measurement based on Solc-Sagnac interferometer is demonstrated, which is fabricated by fusing two segments of polarization maintaining fiber (PMF) with a rotation angle. As the lengths of the two PMFs are close to each other, a vernier effect is generated. Through theoretical and simulation analysis, it is found that as the fusion angle is 90°, the envelope can be eliminated and the waveform similar to that of ordinary single-ring Sagnac interferometer is realized. The longer PMF serves as the sensing part, and the changes in temperature and strain cause variations in the birefringence of the sensing fiber which leads to the shift of the interference signal. Three sets of temperature sensing experiments are carried out to demonstrate the influences of the length parameters of the two PMFs on the sensitivity. We find the temperature sensitivities are 16.9, 32.6, and 43.8 nm/°C, respectively, which is improved by 11.3, 21.9, and 29.4 times compared to the ordinary single-ring Sagnac interferometer. Meanwhile, the optimal fiber structure is used for strain sensing experiments whose sensitivity is 785 pm/ $\mu \varepsilon $ which increases by 28.8 times compared with ordinary single-loop interferometer. Then, the dual parameter measurement of temperature and strain is realized by using coefficient matrix. From the experimental results, it can be seen that the fiber structure with a fusion angle of 90° has the vernier effect to achieve the amplification of sensitivity and the corresponding interferometer possesses the advantages of easy demodulation and high accuracy due to the simple waveform.

A Compact Fiber Sensor Based on the High Birefringence Polarization Maintaining Fiber for Simultaneous Strain and Temperature Measurement

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement

Temperature and strain simultaneous sensing measurement based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating

Simultaneous Measurement of Temperature and Strain Based on Fiber Loop Mirror Combined with Fiber Bragg Grating

A compact multifunctional fiber sensor for simultaneous underwater measurement of salinity, temperature and strain

Temperature Insensitive Distributed Wide-dynamic-range Strain Sensing based on Polarization-Maintaining Photonic Crystal Fiber

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

Simultaneous Strain and Temperature Measurement Using Compact Core-Offset Inter-Modal Interferometer with Embedded Fiber Bragg Grating

Ultrasensitive Temperature and Strain Sensor Based on a Hybrid Fiber Interferometer With the Vernier Effect

Multibeam Interferometer Using a Photonic Crystal Fiber with Two Asymmetric Cores for Torsion, Strain and Temperature Sensing

Hybrid Interferometer Sensor Based on the Enhanced Vernier Effect for the Simultaneous Measurement of Strain and Temperature

A Reflective Temperature-Insensitive All-Fiber Polarization-Mode Interferometer and Pressure Sensing Application Based on Pm-Pcf

A Spiral-Polished Fiber Sensor for Strain and Temperature Measurement

An Integrated Fiber Michelson Interferometer Based on Twin-Core and Side-Hole Fibers for Multiparameter Sensing

In-Fiber Mach-Zehnder Interferometer Exploiting a Micro-Cavity For Strain and Temperature Simultaneous Measurement

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

Ultra-high Sensitivity Sensor for Temperature and Strain Measurement Based on Solc-Sagnac Interferometer

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method