Abstract:A strain sensor based on cascaded Sagnac loops with two polarization-maintaining photonic crystal fibers (PMPCFs) has been experimentally demonstrated. Air holes distributed on the cross section of PMPCF go through the whole fiber, which makes the special fiber more sensitive to ambient force compared with conventional optical fiber. The lengths of the two PMPCFs are close, but not the same, to form envelopes on the total output spectrum and then obtain high resolution to the detected parameter by the Vernier effect. The influences of the difference in length of the two PMPCFS on spectral envelopes are discussed. As the length of the PMPCF in reference loop increases, free spectrum range of the cascaded Sagnac loops (or envelope period) and magnification decrease. The sensitivities of this strain sensor are calculated by tracking upper and lower envelopes. Results reveal that its average sensitivity is up to 45.15 pm/ $\mu \varepsilon $ and the corresponding resolution is $0.44~\mu \varepsilon $ as strain varies from 0 to $2000~\mu \varepsilon $ . Compared with a single Sagnac loop, the sensitivity magnification is about 28.94. The sensing characteristics of a conventional polarization-maintaining fiber (PMF) are studied to compare with the PMPCF. Moreover, reversibility has also been proved to possess low error rate. In short, the fiber strain sensor possesses high sensitivity and great reversibility.

Photonic crystal fiber strain sensor based on multimode/air spherical cavity structure

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

Highly Sensitive Strain Sensor Based on a Novel Mach-Zehnder Interferometer with TCF-PCF Structure

Highly sensitive strain sensing using a polarization-maintaining photonic crystal fibre based Mach–Zehnder interferometer

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

Ultrasensitive Strain Sensor Based on Mach-Zehnder Interferometer with Bent Structures

Temperature and Strain Sensor Based on a Few-Mode Photonic Crystal Fiber

Optical Fiber Core Diameter Mismatched In-Fiber Mach-Zehnder Interferometer for Strain Sensing

Strain Sensor Realized by Using Low-Birefringence Photonic-Crystal-Fiber-Based Sagnac Loop

An asymmetric spherical-shape structure strain sensor based on few mode fiber

Using Mode Coupling Mechanism in Symmetrical Triple-Core Photonic Crystal Fiber for High Performance Strain Sensing

Strain-Insensitive Temperature Sensor Based on Few-Mode Fiber and Photonic Crystal Fiber

Intensity-Modulated Strain Sensor Based on Fiber In-Line Mach–Zehnder Interferometer

High-Performance Bending Vector and Strain Sensor Using a Dual-Tapered Photonic Crystal Fiber Mach–Zehnder Interferometer

Highly Sensitive Strain Sensor Based on Composite Interference Established Within S-tapered Multimode Fiber Structure.

Compact Strain Fiber Sensor Based on Fabry-Perot Microstructural Air Cavity

A strain sensor based on in-line Mach-Zehnder interferometer with thin-core fiber

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

Cascaded Sagnac Loops Embedded with Two Polarization Maintaining Photonic Crystal Fibers for Highly Sensitive Strain Measurement

High-Sensitivity Fabry–Pérot Strain Senor Based on Fusion Splicing Photonic Crystal Fiber and Single Mode Fiber