Abstract:An ultra-sensitive strain sensor has been designed using two parallel Fabry-Perot interferometers (FPI) as well as the Vernier effect (VE) and harmonic vernier effect (HVE). This new FPI is formed between tapered two-mode fiber cantilever beam inserted into quartz capillary and single-mode fiber. We prepared two similar cantilever beam structures, namely FPI1 and FPI3. Due to the cantilever beam inserted into the capillary tube increasing the effective length of strain acting on FPI, the strain sensitivities of FPI1 and FPI3 are as high as 167 pm/µε and 83 pm/µε, respectively. In order to further improve the strain sensitivity of FPI, based on the principles of optical VE and HVE, we prepared FPI2 and FPI4 with air-cavity using capillaries. FPI1 and FPI2 were matched to form a VE sensor (named S1), while FPI3 and FPI4 were matched to form a first-order HVE sensor (named S2). The strain sensitivities of S1 and S2 are as high as −2.30 nm/µε and −2.98 nm/µε respectively. This is currently the highest reported strain sensitivity. Additionally, their temperature cross-sensitivity is only 35 nε/℃ and 23 nε/℃, respectively. The proposed sensor has excellent repeatability and stability in measuring strain. In short, the proposed strain sensor has a simple structure, cost-effective, easy to manufacture, and has extremely high sensitivity, making it one of the best candidate structures for strain measurement.

High-Sensitivity Microfiber Strain and Force Sensors

Coiling an Optical Fiber for Long-Range Dynamic Displacement and Force Sensing

Microfiber Optical Sensors: A Review

Highly Sensitive and Fast Response Strain Sensor Based on Evanescently Coupled Micro/nanofibers

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Large detection range and high strain sensitivity fiber SPR sensor based on wave structure

Ultrasensitive Measurement of Micronewton Force or Weak Dynamic Signal Based on PDMS Sealed Tapered Fiber Mach–Zehnder Interferometer

Optical Nanofiber-Enabled Self-Detection Picobalance

A nanonewton force sensor using a U-shape tapered microfiber interferometer

A Miniature Reflective Micro-Force Sensor Based on A Microfiber Coupler

In-situ Forming Ultra-Mechanically Sensitive Materials for High-Sensitivity Stretchable Fiber Strain Sensors.

Simulation of Optical Microfiber Strain Sensors Based on Four-Wave Mixing

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

3D-Printed Ultracompact Multicore Fiber-Tip Probes for Simultaneous Measurement of Nanoforce and Temperature

Three-dimensional printed microcantilever with mechanical metamaterial for fiber-optic microforce sensing

Ultra-highly Sensitive Surface-Corrugated Microfiber Bragg Grating Force Sensor

S-Tapered Fiber Sensors for Highly Sensitive Measurement of Refractive Index and Axial Strain

Ultra-sensitive strain sensor composed of tapered two-mode fiber micro-cantilever inserted into quartz capillary

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

Ultra-high Sensitivity Strain Sensor Based on Biconical Fiber with a Bulge Air-Bubble

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure