Abstract:Ultrasensitive nanomechanical instruments, e.g., atomic force microscopy (AFM), can be used to perform delicate biomechanical measurements and reveal the complex mechanical environment of biological processes. However, these instruments are limited because of their size and complex feedback system. In this study, we demonstrate a miniature fiber optical nanomechanical probe (FONP) that can be used to detect the mechanical properties of single cells and in vivo tissue measurements. A FONP that can operate in air and in liquids was developed by programming a microcantilever probe on the end face of a single-mode fiber using femtosecond laser two-photon polymerization (TPP) nanolithography. To realize stiffness matching of the FONP and sample, a strategy of customizing the microcantilever's spring constant according to the sample was proposed based on structure-correlated mechanics. As a proof-of concept, three FONPs with spring constants varying from 0.421 N/m to 52.6 N/m by more than two orders of magnitude were prepared. The highest microforce sensitivity was 54.5 nm/μN and the detection limit was 2.1 nN. The Young's modulus of heterogeneous soft materials, such as polydimethylsiloxane, muscle tissue of living mice, onion cells, and MCF-7 cells, were successfully measured, which validating the broad applicability of this method. Our strategy provides a universal protocol for directly programming fiber-optic AFMs. Moreover, this method has no special requirements for the size and shape of living biological samples, which is infeasible when using commercial AFMs. FONP has made substantial progress in realizing basic biological discoveries, which may create new biomedical applications that cannot be realized by current AFMs.

Three-dimensional printed microcantilever with mechanical metamaterial for fiber-optic microforce sensing

Microstructured Cantilever Probe on Optical Fiber Tip for Microforce Sensor

High-Sensitivity Microfiber Strain and Force Sensors

3D printed fiber-optic nanomechanical bioprobe

3D-Printed Ultracompact Multicore Fiber-Tip Probes for Simultaneous Measurement of Nanoforce and Temperature

Fiber‐integrated Force Sensor using 3D Printed Spring‐Composed Fabry‐Perot Cavities with a High Precision Down to Tens of Piconewton

Development of a Microforce Sensor Based on a Fiber Bragg Grating Used for Micro-/Nanomanipulation.

Micro-scale fiber-optic force sensor fabricated using direct laser writing and calibrated using machine learning.

Strain Force Sensor with Ultra-High Sensitivity Based on Fiber Inline Fabry-Perot Micro-Cavity Plugged by Cantilever Taper

Four-Dimensional Printing of a Fiber-Tip Multimaterial Microcantilever as a Magnetic Field Sensor

Optomechanical transduction of an integrated silicon cantilever probe using a microdisk resonator

Design and Realization of 3D Printed Fiber-Tip Microcantilever Probes Applied to Hydrogen Sensing

Measurement of Interfacial Adhesion Force with a 3D-Printed Fiber-Tip Microforce Sensor

Two-photon 3D Printed Fiber-Optic Fabry-Perot Probe for Triaxial Contact Force Detection of Guidewire Tips

Optical Fiber Probe Microcantilever Sensor Based on Fabry–Perot Interferometer

Development of Elastic Diaphragm Structure for Ultra-low Stiffness Probe and Mechanical Properties Testing Method

Micro-Force Sensor Based On Photonic Crystal Cavity Interrogated By Fiber Loop Ring-Down Technology

Optimal Design of A Cantilever-Based Sensor for Measuring Micro-Forces

Femtosecond Laser Direct Writing of a 3D Microcantilever on the Tip of an Optical Fiber Sensor for On-Chip Optofluidic Sensing

Ultrasensitive Measurement of Micronewton Force or Weak Dynamic Signal Based on PDMS Sealed Tapered Fiber Mach–Zehnder Interferometer

A single-atom level mechano-optical transducer for ultrasensitive force sensing