Abstract:Displacement and strain, two of the most important physical quantities in experimental solid mechanics, are seldomly measured simultaneously in a single experimental configuration. In order to provide and improve corresponding sensing techniques, an experimental setup system for simultaneous measurement of dynamic displacement and strain on a flexible cantilever beam using two fiber Bragg gratings (FBGs) in a single fiber is proposed. To realize high-speed multiplexing and demodulation, a configuration incorporating a coarse wavelength-division multiplexing (CWDM) technique and an FBG transmission filter is implemented. The cantilever beam is subjected to steel-ball impact from which the dynamic multipoint displacement/strain sensing performances of the CWDM and FBG filter-based sensing system are demonstrated. Experimental results in temporal and frequency domain are compared with those obtained by the finite element method (FEM) predictions based on identification of the impact-loading history. A noncontact Fotonic displacement sensor and a polyvinylidene-fluoride film (PVDF) strain sensor are also used for comparison. With transient and resonant frequency simulations conducted by the FEM, loading effects of the sensing system are examined. The results obtained in this study indicate that the proposed CWDM and FBG filter-based sensing system is capable of performing simultaneous multipoint displacement/strain measurements in a single fiber with large bandwidth, high sensitivity, and low intensity loss.

Coiling an Optical Fiber for Long-Range Dynamic Displacement and Force Sensing

High-Sensitivity Microfiber Strain and Force Sensors

A Wide-Range Displacement Sensor Based on Plastic Fiber Macro-Bend Coupling

A High-Sensitivity Fiber Bragg Grating Displacement Sensor Based on Transverse Property of a Tensioned Optical Fiber Configuration and Its Dynamic Performance Improvement

Investigation of a spring-shaped fiber modulation based on bending loss for detecting linear displacement

Two-dimensional displacement optical fiber sensor based on macro-bending effect

Large detection range and high strain sensitivity fiber SPR sensor based on wave structure

A Fiber Strain Sensor with High Resolution and Large Measurement Scale

Optical Fiber Sensor with a Lateral-Offset Structure Assisted by Virtual Vernier Effect for Stretching Strain Measurement

Displacement Sensor Based on a Small U-Shaped Single-Mode Fiber

Fiber-optic Sensor Implanted with Seven-Core Helical Structure for Measurement of Tensile Strain and Extrusion Bending

Design, sensing principle and testing of a novel fiber optic displacement sensor based on linear macro-bending loss

Robust Fiber Strain Sensor by Designing Coaxial Coiling Structure with Mutual Inductance Effect

All Fiber Torsion and Displacement Sensor Based on Image Detection

A Novel Force Sensor Based on Optical Fibers Used for Semicircular Flexure Beam Unit.

One Kind of Fiber Bragg Grating Displacement Sensor Using Micro-Elastic Spring

Fiber SPR two-dimensional micro displacement sensor based on the coaxial double waveguide with a conical structure.

A Bi‐Sheath Fiber Sensor for Giant Tensile and Torsional Displacements

Simultaneous measurement of dynamic displacement and strain in a single fiber using coarse wavelength-division multiplexing and fiber Bragg-grating filter-based sensing system

A Flexible Fiber Displacement Sensor with Tunable Resolution and Dynamic Range Based on a Few-Mode Fiber Loop

Strain-independent Fiber Torsion and Displacement Sensor Based on Acoustically-Induced Fiber Grating