Microstructured Cantilever Probe on Optical Fiber Tip for Microforce Sensor

Famei Wang,Changrui Liao,Mengqiang Zou,Dejun Liu,Haoqiang Huang,Chao Liu,Yiping Wang

DOI: https://doi.org/10.1007/s13320-024-0704-6

IF: 2.814

2024-04-03

Photonic Sensors

Abstract:Benefiting from the great advances of the femtosecond laser two-photon polymerization (TPP) technology, customized microcantilever probes can be accurately 3-dimensional (3D) manufactured at the nanoscale size and thus have exhibited considerable potentials in the fields of microforce, micro-vibration, and microforce sensors. In this work, a controllable microstructured cantilever probe on an optical fiber tip for microforce detection is demonstrated both theoretically and experimentally. The static performances of the probe are firstly investigated based on the finite element method (FEM), which provides the basis for the structural design. The proposed cantilever probe is then 3D printed by means of the TPP technology. The experimental results show that the elastic constant k of the proposed cantilever probe can be actively tuned from 2.46 N/m to 62.35 N/m. The force sensitivity is 2.5 nm/μN, the Q -factor is 368.93, and the detection limit is 57.43 nN. Moreover, the mechanical properties of the cantilever probe can be flexibly adjusted by the geometric configuration of the cantilever. Thus, it has an enormous potential for matching the mechanical properties of biological samples in the direct contact mode.

optics,instruments & instrumentation

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to design and fabricate an optical - fiber micro - force sensor with high sensitivity and controllable mechanical properties in the field of micro - force measurement. Specifically, the author proposes a method based on femtosecond - laser - induced two - photon polymerization (TPP) technology to prepare a micro - cantilever probe with a hollow structure on the end face of a single - mode fiber. This new micro - force sensing technology changes the mechanical characteristics of the micro - cantilever by adjusting its geometric shape, so as to match the mechanical characteristics of biological samples and achieve accurate measurement of tiny external forces.

The key contributions of the paper include:
- Proposing a method of directly printing micro - cantilever probes on the end face of optical fibers using TPP technology, realizing three - dimensional customized manufacturing of the probes.
- Simulating the static performance of micro - cantilever probes with different shapes and sizes by the finite element method (FEM), providing a theoretical basis for structural design.
- Experimentally verifying that the elastic constant \( k \) of the designed micro - cantilever probe can be adjusted from 2.46 N/m to 62.35 N/m, the force sensitivity reaches 2.5 nm/µN, the quality factor \( Q \) is 368.93, and the detection limit (DL) is 57.43 nN.

These achievements make the sensor have broad application prospects in fields such as biomechanical detection and materials science measurement.