Abstract:A multi-parameter sensor based on dumbbell-shaped double-cladding fiber (DCF) structure cascaded long period fiber grating (LPFG) is proposed and fabricated. It is formed by discharging between single mode fiber (SMF) and DCF to form a waist-enlarged taper and then cascading two LPFGs. When the fiber is affected by the thermal expansion effect, thermo-optic effect and elasto-optic effect, the resonant peaks formed by inter-mode interference will shift, and the shifts generated by different resonant peaks are also different. By demodulating the wavelength shift of the three resonant peaks, the temperature, refractive index and axial strain can be measured by using the coefficient sensitivity matrix. The experimental results show that the temperature sensitivity of the three resonance peaks is 14.79 pm/°C, 69.07 pm/°C and 89.83 pm/°C in the range of 25 °C~80 °C. The refractive index sensitivities of three resonance peaks are 14.27 nm/RIU, −71.39 nm/RIU and −141.07nm/RIU in the range of 1.3355 ~ 1.3715. The axial strain sensitivities of three resonance peaks are −2.26 pm/ , −2.5pm/ and −3.14 pm/ in the range of ~ . The corresponding resolutions are 0.6905 °C, 0.00054RIU and , respectively. The sensor is simple and has good linearity. It can be widely used in environmental monitoring for different parameter.

All-Fiber Strain Sensor Based on Dual Side V-Grooved Long-Period Fiber Grating

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Highly Sensitive Strain Sensor Based on a Long-Period Fiber Grating with Chain-Shaped Structure.

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

Compact Fiber Strain Sensor Fabricated by a CO2 Laser.

A compact fiber-based sensor for wide range strain measurement

High-Sensitivity Strain and Temperature Simultaneous Measurement Sensor Based on Multimode Fiber Chirped Long-Period Grating

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

Large detection range and high strain sensitivity fiber SPR sensor based on wave structure

In-Fiber Grating Fabricated by Femtosecond Laser Direct Writing for Strain Sensing

Highly Sensitive Long-Period Fiber-Grating Strain Sensor with Low Temperature Sensitivity

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

A Spiral-Polished Fiber Sensor for Strain and Temperature Measurement

Temperature self-compensation strain sensor based on cascaded concave-lens-like long-period fiber gratings

Multilongitudinal Mode Fiber Laser for Strain Measurement

High-Sensitivity Microfiber Strain and Force Sensors

A dual-wavelength erbium-doped fiber laser for high resolution strain sensing with compound filter of a Sagnac loop and a long period fiber grating

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

A Long-Period Fiber Grating Sensor Based on a Core-Cladding Misalignment Structure

Deeply-Tapered Ultrashort Long-Period Fiber Grating and Its Application to Ultrasensitive Transverse-Load Sensor

A Multiparameter Sensor Based on Dumbbell-Shaped Double-Cladding Fiber Structure Cascaded Long Period Fiber Grating