Abstract:Optical sensors for strain measurement have been significantly concerned due to their unique characteristics of quick response, anti-electromagnetic interference and compact size. In this article, a brand-new type of "M" -shaped core long-period fiber grating (M-LPFG) based on core-modulated method is proposed and experimen-tally testified. By means of side-polishing and high-temperature oxyhydrogen flame heating, the cladding of fiber tends to be circular and the core will bend slightly towards the polished area. The micro-bending core is suffered strong refractive index modulation and this phenomenon also excites the evanescent field adequately. By analyzing the simulated light transmission and the transmission spectrum, considerable degree of micro-bending core is achieved. In the experiment, the proposed sensor with 10 periods (5 mm) displays a high strain sensitivity of-19.05 pm/ li epsilon with range of 0-500 li epsilon , and the temperature sensitivity of which is obtained as 51.16 pm/degrees C. Due to relatively small influence on cladding and self-circularity of structure, the M-LPFG possesses a high mechanical strength. With the above advantages of high sensitivity, compact size, low-cost and strong me-chanical strength, the method of fabricating M-LPFG has great potential in strain measurement.

Highly Sensitive Long-Period Fiber-Grating Strain Sensor with Low Temperature Sensitivity

Highly Sensitive Temperature-Independent Strain Sensor Based on a Long-Period Fiber Grating with a CO$_{2}$-Laser Engraved Rotary Structure

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

Highly Sensitive Strain Sensor Based on a Long-Period Fiber Grating with Chain-Shaped Structure.

Strain and Temperature Characteristics of a Long-Period Grating Written in a Photonic Crystal Fiber and Its Application as a Temperature-Insensitive Strain Sensor

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Temperature self-compensation strain sensor based on cascaded concave-lens-like long-period fiber gratings

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

High-sensitivity Strain Sensor Based on a Helical-Core Long-Period Fiber Grating.

All-Fiber Strain Sensor Based on Dual Side V-Grooved Long-Period Fiber Grating

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Design of Holder Type Packaging Fiber Bragg Grating Strain Sensor with Low Temperature Sensitivity

High Temperature-Sensitivity Sensor Based On Long Period Fiber Grating Inscribed With Femtosecond Laser Transversal-Scanning Method

A high sensitive fiber-optic strain sensor with tunable temperature sensitivity for temperature-compensation measurement

A strain sensor with low temperature crosstalk based on re-modulation of D-shaped LPFG

Compact Fiber Strain Sensor Fabricated by a CO2 Laser.

Temperature-insensitive strain sensor based on in-line Fabry-Perot interferometer

A Compact Strain Sensor Based on M-shaped-core Long-Period Fiber Grating

Strain, bending, refractive index independent temperature sensor based on a graded index multimode fiber embedded long period fiber grating