Abstract:An integrated all-fiber sensor based on ring-core fiber (RCF)-embedded long-period fiber grating (LPFG) cascaded RCF-Mach-Zehnder interferometer (MZI) for measuring curvature and temperature is proposed and demonstrated experimentally. The RCF-embedded LPFG section is fabricated by periodically embedding hundreds of micrometers sized RCF into SMF by employing the mature, low-cost cleaving splicing method (CSM). Due to the large core diameter mismatch, the energy within the core is exceeded into the cladding mode more effectively, and the periodic refractive index modulation gives our sensor has a compact size with only three-period SMF-RCF structures and a total length of 2.8 mm. To measure curvature and temperature simultaneously, an RCF-based MZI with an RCF length of 1 mm is cascaded behind LPFG by employing the CSM. Thus, there are two dips corresponding to LPFG and MZI occur in the transmission spectrum. The dips show different responses to curvature and temperature changes. The maximum curvature and temperature sensitivities of the two dips are 26.61, -1.67 nm/m(-1), 0.053 nm/.C, and 0.059 nm/degrees C, respectively. By utilizing a 2 x 2 matrix, simultaneous measurement of curvature and temperature can be achieved. The integrated all-fiber sensor has a compact size, low cost, and high sensitivity possessing more competitivity in complex, harsh applications.

Strain, bending, refractive index independent temperature sensor based on a graded index multimode fiber embedded long period fiber grating

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Ultrasensitive temperature sensor based on a urethane acrylate-coated off-axis spiral long period fiber grating

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Few-mode fiber-embedded long-period fiber grating for simultaneous measurement of refractive index and temperature

High-Sensitivity Strain and Temperature Simultaneous Measurement Sensor Based on Multimode Fiber Chirped Long-Period Grating

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

Strain and Temperature Characteristics of a Long-Period Grating Written in a Photonic Crystal Fiber and Its Application as a Temperature-Insensitive Strain Sensor

Long-period fiber grating cascaded to thin-core fiber for simultaneous measurement of liquid refractive-index and temperature

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

Refractive index and temperature sensors based on no-core fiber cascaded with long period fiber grating

A Long-Period Fiber Grating Sensor Based on a Core-Cladding Misalignment Structure

Etched multicore fiber Bragg gratings for refractive index sensing with temperature in-line compensation

Optimization of Long-Period Grating-Based Refractive Index Sensor by Bent-Fiber Interference

Highly Sensitive Long-Period Fiber-Grating Strain Sensor with Low Temperature Sensitivity

Theoretical analysis based on angle cascaded long period fiber grating for surrounding refractive index and temperature measurement

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

An Ultra-High-Resolution Bending Temperature Decoupled Measurement Sensor Based on a Novel Core Refractive Index-like Linear Distribution Doped Fiber

A Multiparameter Sensor Based on Dumbbell-Shaped Double-Cladding Fiber Structure Cascaded Long Period Fiber Grating