Abstract:The strain sensitivity characteristic of long-period fibre grating(LPFG) was studied by coupled-mode theory and the strain sensitivity analytic equation of the resonant wavelength was deduced.All kinds of factors affecting the strain sensitivity of the resonant wavelength were analyzed in detail and numerical simulation was made.The results show that different LPFG can be made by special fibre with matching fibre core and elastic-optical coefficients of fibre cladding,which can be sensitive or insensitive to strain.The LPFG used in the experiment was induced by using high-frequent CO_2 laser pulses(20 kHz) coupled with three-beam azimuthally symmetric writing technique in common communication single-mode fibre and it's strain sensitivity characteristic was tested.The experiment results show that the resonant wavelength and the peak loss shift linearly with the change of strain and the corresponding sensitivities are about-0.66 nm/me and 0.69 dB/me,respectively.Based on the linear strain sensitivity characteristic,LPFG can be used as strain sensor.Because the peak loss is insensitive to temperature,this kind of LPFG has great advantage as strain sensor in high-temperature environment.

Strain and Temperature Characteristics of a Long-Period Grating Written in a Photonic Crystal Fiber and Its Application as a Temperature-Insensitive Strain Sensor

Theoretical and Experimental Study on Temperature Characteristic of Long-period Fibre Grating

Strain and Temperature Sensitivities of Long Period Fiber Grating

High-Sensitivity Strain and Temperature Simultaneous Measurement Sensor Based on Multimode Fiber Chirped Long-Period Grating

Highly Sensitive Long-Period Fiber-Grating Strain Sensor with Low Temperature Sensitivity

Strain and temperature sensor based on S-taper embedded in long-period grating

Fabrication of Phase-Shifted Long-Period Fiber Grating and Its Application to Strain Measurement

Temperature and Strain Characteristic of Long Period Fiber Grating (LPFG) Induced by High Frequency CO2 Laser Pulses

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

Sensing characteristics of long period grating by writing directly in SMF-28 based on 800 nm femtosecond laser pulses

Highly Sensitive Strain Sensor Based on a Long-Period Fiber Grating with Chain-Shaped Structure.

Highly Sensitive Temperature-Independent Strain Sensor Based on a Long-Period Fiber Grating with a CO$_{2}$-Laser Engraved Rotary Structure

Temperature and Strain Sensor Based on Weak LPG and Fiber Ring Down

High-Temperature and Strain Characteristics of Long Period Grating with Asymmetric Refractive Index Profile in the Cross Section of Fiber

Strain, bending, refractive index independent temperature sensor based on a graded index multimode fiber embedded long period fiber grating

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Sensing Characterization of Helical Long Period Fiber Grating Fabricated by a Double-Side CO 2 Laser in Single-Mode Fiber

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

Research on the Two-Parameter Sensing Technology Based on Pho- Tonic Crystal Fiber Long-Period Grating

Long-Period Fiber Grating Sensor Based on a Conductive Polymer Functional Layer

Simultaneous Measurement of Strain and Temperature Using a Long-Period Fiber Grating with Rotary Refractive Index Modulation