Abstract:Thermo-sensitive poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by UV-initiated photopolymerization and used as the cladding layer for thermal-sensing based on the long-period fiber grating (LPFG). In the reaction, N,N'-methylenebisacrylamide was used as crosslinker, benzoin dimethyl ether as initiator. The characteristics of the hydrogels were investigated with FTIR, DSC and TG. The effect of the crosslinking agent content on the swelling ratio was also investigated. The results indicated that the crosslinking agent content had a significant influence on the swelling ratio. A LPFG sensor was designed by utilizing the PNIPAM hydrogel as a sensitive cladding coating. For the preparation, a thin-film of the PNIPAM hydrogel was deposited on the LPFG using the dip-coating technique. Changes in temperature and the relative humidity (RH) cause variation of the spectral characteristics of the LPFG in both the resonant wavelength and the minimum transmission. Following the study to establish an optimized coating, the effect of the temperature and the RH variations on the performance of the sensor was investigated. The experimental results showed that the thin film parameters (thickness and refractive index) were directly related to the sensitivity of sensors, and the LPFG coated with PNIPAM hydrogel showed sensitive response to the temperature variation. Combining the advantages of film sensors and fiber optical sensors, the hydrogel-coated LPFG sensors have application prospects in different areas.

Long-Period Fiber Grating Sensor Based on a Conductive Polymer Functional Layer

Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Sensitivity-enhanced temperature sensor based on PDMS-coated long period fiber grating

High sensitivity temperature measurement via mask-free hybrid polymer long period fiber grating

A Long-Period Fiber Grating Sensor Based on a Core-Cladding Misalignment Structure

Photosensitive polymer-based micro-nano chirped long-period fiber gratings for temperature sensing

Strain and Temperature Characteristics of a Long-Period Grating Written in a Photonic Crystal Fiber and Its Application as a Temperature-Insensitive Strain Sensor

In-Fiber Grating Fabricated by Femtosecond Laser Direct Writing for Strain Sensing

A Multiparameter Sensor Based on Dumbbell-Shaped Double-Cladding Fiber Structure Cascaded Long Period Fiber Grating

LONG-PERIOD FIBER GRATING COATED WITH PNIPAM FOR THERMAL SENSING APPLICATIONS

Optical pH Sensor Based on a Long-Period Fiber Grating Coated with a Polymeric Layer-by-Layer Electrostatic Self-Assembled Nanofilm

A Cheap and Practical FBG Temperature Sensor Utilizing a Long-Period Grating in a Photonic Crystal Fiber

Femtosecond laser fabrication of long period fiber gratings and applications in refractive index sensing

Fabrication and Sensing Characteristics of Long-Period Fiber Grating in Capillary Fiber

Sensing characteristics of long period grating by writing directly in SMF-28 based on 800 nm femtosecond laser pulses

Femtosecond Laser Inscribed Small-Period Long-Period Fiber Gratings With Dual-Parameter Sensing

Long-period Grating Inscription on Polymer Functionalized Optical Microfibers and Its Applications in Optical Sensing

Temperature and Twist Sensor Based on the Sagnac Interferometer with Long-Period Grating in Polarization-Maintaining Fiber

Deeply-Tapered Ultrashort Long-Period Fiber Grating and Its Application to Ultrasensitive Transverse-Load Sensor