Abstract:In this paper, a coated cladding-reduced superimposed long period fiber grating and fiber Bragg grating structure (SLBG) is proposed, which could measure three parameters, strain, temperature and surrounding refractive index (SRI), simultaneously. Firstly, the mode-coupling behaviors in the structure is determined according to the phase matching conditions, and thus the coupled-mode equations of the structure is given by coupled-mode theory. Then, the simulated transmission spectrum shows three attenuation peaks generated by the coupling between forward core mode with forward cladding modes, the backward core mode and backward cladding modes respectively. To make demodulation more convenient and accurate, the structure is optimized. The signal-to-noise ratio is improved by reducing the attenuation peak amplitude based on the corroded cladding, and the sensitivity is enhanced based on mode barrier effect caused by high refractive index film. After the optimization, the simulation results of the response of the three transmission peaks to three parameters show good performance in both sensitivity and linearity (all larger than 0.999). The maximum sensitivities of three transmission peaks to strain, temperature, and SRI are 3.15 pm/με, 817.6 pm/°C, and − 3472 nm/RIU, respectively. Finally, the condition number of the parametric demodulation matrix is 6.0046, indicating the inversion of the resonant wavelength offset has high precision. This paper provides reliable theoretical guidance for the design of superimposed fiber grating structure, and the proposed structure can be applied to submarine communication optical fiber monitoring.

Theoretical analysis based on angle cascaded long period fiber grating for surrounding refractive index and temperature measurement

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Angularly Cascaded Long-Period Fiber Grating for Curvature and Temperature Detection

High-sensitivity sensor design based on cascaded long-period fiber grating with film coating

Refractive index and temperature sensors based on no-core fiber cascaded with long period fiber grating

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Simultaneous measurement of temperature and refractive index based on a core-offset Mach-Zehnder interferometer cascaded with a long-period fiber grating

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

Strain, bending, refractive index independent temperature sensor based on a graded index multimode fiber embedded long period fiber grating

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Optimization of Long-Period Grating-Based Refractive Index Sensor by Bent-Fiber Interference

Long-period fiber grating cascaded to thin-core fiber for simultaneous measurement of liquid refractive-index and temperature

Few-mode fiber-embedded long-period fiber grating for simultaneous measurement of refractive index and temperature

Simultaneous Measurement of Refractive Index and Temperature by Using Dual Long-Period Gratings with an Etching Process

Sensitivity Characterization of Cascaded Long-Period Gratings Operating near the Phase-Matching Turning Point

Discrimination Between the Refractive Index and Temperature by Using a Sandwiched Structure of Long-Period Gratings

Power-type Liquid-Level Sensor for High Refractive Index Liquid Based on Long-Period Fiber Grating

Multiparameter Sensor Based on Cascaded Micro-Tapered Long-Period Fiber Gratings

Three-parameter high-precision sensor based on superimposed cladding-reduced coated long-period fiber grating and fiber Bragg grating

A Long-Period Fiber Grating Sensor Based on a Core-Cladding Misalignment Structure