Abstract:A double-sided photonic crystal fiber (PCF) temperature and refractive index (RI) sensor based on surface plasmon resonance (SPR) is reported to simultaneously measure temperature and RI. An arc groove covered with gold is filled with chloroform for temperature detection. The D-shaped plane coated with silver is in direct contact with the analyte to provide the RI. Two independent channels distinguish temperature and RI changes, thus completely solving the cross-sensitivity problem. The sensing characteristics of the plane coating, arc coating, and inner ring coating are discussed. The influence of gold film closure on the optimum RI measurement range was identified, and the best sensing structure of chloroform as a temperature-sensitive material is obtained. The sensing characteristics of different types of metal films are investigated. It is concluded that the band separation may be achieved by plating gold film and silver film in the arc groove and D-plane, respectively. The influence of the central angle of the arc groove on the sensor characteristics was investigated. High-order resonance may be avoided at a 180° center angle. The influence of the thickness of the metal film on the sensitivity of the sensor is studied numerically, and the optimal coating thickness is 50 nm. This work simplifies the selection of the RI range of sensing materials and provides a new approach to solve the high-order resonance and band interference in SPR multi-parameter sensors.

Discrimination Between the Refractive Index and Temperature by Using a Sandwiched Structure of Long-Period Gratings

Sandwiched long-period gratings for simultaneous measurement of refractive index and temperature

Simultaneous Measurement of Refractive Index and Temperature by Using Dual Long-Period Gratings with an Etching Process

Theoretical analysis based on angle cascaded long period fiber grating for surrounding refractive index and temperature measurement

Optimization of Long-Period Grating-Based Refractive Index Sensor by Bent-Fiber Interference

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Line by line inscribed small period long period grating for wide range refractive index sensing

Strain, bending, refractive index independent temperature sensor based on a graded index multimode fiber embedded long period fiber grating

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Sensitivity Characterization of Cascaded Long-Period Gratings Operating near the Phase-Matching Turning Point

Double-sided photonic crystal fiber (PCF) temperature and refractive index (RI) sensor based on surface plasmon resonance (SPR)

Investigation of a D-Shaped Plastic Optical Fiber Assisted by a Long Period Grating for Refractive Index Sensing

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

A wide-range temperature immune ultra-sensitive refractive index sensor using concatenated LPGs

Simultaneous measurement of temperature and refractive index based on a core-offset Mach-Zehnder interferometer cascaded with a long-period fiber grating

Long-period fiber grating cascaded to thin-core fiber for simultaneous measurement of liquid refractive-index and temperature

Ambient Refractive-Index Measurement with Simultaneous Temperature Monitoring Based on a Dual-Resonance Long-Period Grating Inside a Fiber Loop Mirror Structure

Refractive index and temperature sensors based on no-core fiber cascaded with long period fiber grating

Temperature compensated highly sensitive refractive index sensor based on Mach-Zehnder interferometer and FBG

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Helical Intermediate-Period Fiber Grating for Refractive Index Measurements With Low-Sensitive Temperature and Torsion Response