Abstract:In order to avoid the temperature cross-sensitivity during refractive index measurement, a sensor based on a superimposed long period gratings fabricated in few mode fiber was proposed. The superimposed long period grating was inscribed under the CO2 laser irradiation as following: first, a long period fiber grating with a period of 654 mu m and length of 30 mm was inscribed, then the few mode fiber was rotated 180 degrees to inscribe second long period fiber grating with a period of 819 mu m and the same length. Two resonance dips at 1 487.2 nm and 1 533.0 nm appeared in the transmission spectrum, which were formed by coupling between different guided modes. The difference of two resonance dips increases with the refractive index while is constant with temperature increase, which can eliminate temperature cross sensitivity during refractive index measurement. The experimental results show the temperature sensitivity of the sensor is -0.002 5 nm/degrees C in 20 similar to 70 degrees C temperature range and the refractive index sensitivity of 143 nm/RIU in 1.333 similar to 31.376 6 refractive index range. The temperature sensitivity of the sensor is much lower than the refractive index sensitivity, which means that it is insensitive to temperature. Compared with traditional optical fiber sensors, the sensor has the advantages of small temperature cross-sensitivity, high refractive index sensitivity, small size and compact structure, and it can be widely used in industry, water conservancy, medicine and other fields.

Refractive index and temperature sensors based on no-core fiber cascaded with long period fiber grating

A Temperature-Insensitive Refractive Index Sensor Based on No-Core Fiber Embedded Long Period Grating

Simultaneous measurement of temperature and refractive index based on a core-offset Mach-Zehnder interferometer cascaded with a long-period fiber grating

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Refractive Index and Temperature Measurement by Cascading Macrobending Fiber and a Sealed Alternated SMF-MMF Structure

Refractive Index Sensors Based on a Chirped Core Long-Period Fiber Grating

Compact refractive index sensor based on offset splicing long-period fiber grating

Long-Period Fiber Grating Cascaded to an S Fiber Taper for Simultaneous Measurement of Temperature and Refractive Index

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Refractive Index Sensing Characteristic of Superimposed Long Period Gratings on Few Mode Fiber

Long-period fiber grating cascaded to thin-core fiber for simultaneous measurement of liquid refractive-index and temperature

Simultaneous Measurement of Refractive Index and Temperature with High Sensitivity Based on a Multipath Fiber Mach-Zehnder Interferometer

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

Sensitivity-optimized Long-Period Fiber Gratings for Refractive Index and Temperature Sensing

Etched multicore fiber Bragg gratings for refractive index sensing with temperature in-line compensation

A Long-Period Fiber Grating Sensor Based on a Core-Cladding Misalignment Structure

Simultaneous Measurement of Refractive Index and Temperature Based on a Long Period Fiber Grating Inscribed in a Photonic Crystal Fiber with an Electric-Arc Discharge

Core-Offset-Based Fiber Bragg Grating Sensor for Refractive Index and Temperature Measurement

Refractive index and temperature sensor based on Mach-Zehnder interferometer with thin fibers

High-sensitivity Refractive Index and Temperature Sensor Based on Cascading FBGs and Droplet-Like Fiber Interferometer

A Compact LPFG Refractive Index Sensor with High Sensitivity Based on Thin Core -No Core-Thin Core Fiber Structure