Abstract:BackgroundCharacterizations of mechanical properties for composite structures are challenging due to their heterogeneity and anisotropy which lead to more measurements of elastic constants and sophisticated testing apparatus compared to isotropic materials. Measuring in-plane shear modulus for composites with small cross-section or large aspect ratio often requires re-manufacturing of the structure with desired thickness or width fitted for the test methods measuring shear properties. Consequently, the shear modulus obtained using these conventional methods is not a fair evaluation of the current "as-is" manufacturing method but rather a different manufacturing method used to fabricate the test specimen.ObjectiveTo solve this dilemma, we propose a mathematical approach, which only requires 3-point bending test specimens in as-is condition on different span length.MethodsOur approach applies bounded-variable least-squares to data sets of 3-point bending using different span length, to obtain effective flexural modulus and in-plane shear modulus simultaneously.ResultsIt is shown that using conventional testing methods in measure flexural modulus is obsolete for highly anisotropic materials with large aspect ratio because the span to depth ratio is not large enough to neglect shear. Our approach can get accurate flexural and shear modulus from 3 point bending test with small efforts.ConclusionsTesting shear modulus of highly anisotropic materials often introduces significant overheads stemmed from extra tools/jigs or even re-manufacturing. Our approach provides an alternative method without these overheads and resolves two issues: 1) how to determine appropriate span length in 3-point bending test to neglect shear deformation? 2) how to measure flexural and shear modulus in as-is condition?

Measuring elastic constants of wood through static bending using a strain gauge

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

New four-point bending test protocol for the strength grading of timber: relationship between local and global modulus of elasticity (MOE) of maritime pine

Rigidity coefficients of rubber belts for dynamic testing of modulus of elasticity and shear modulus of non-wood engineered board

Evaluating Mechanical Properties of Chinese-fir with Ultrasonic Nondestructive Testing

Measurement of the Flexural Modulus of Chopped Carbon Fiber Tape Reinforced Thermoplastic with Short Beams

Deformation Monitoring for Chinese Traditional Timber Buildings Using Fiber Bragg Grating Sensors

Elastic-Constants for Hardwoods Measured from Plate and Tension Tests

Preliminary Study on Detection of Wood Structure Defects and Evaluation of Residual Elastic Modulus

Full elastic properties characterization of wood by ultrasound using a single sample

A Method to Measure Effective Flexural and Transverse Shear Modulus of Composite Structures with Large Aspect Ratio

Orthotropic Elastic-Constants For Eastern Hardwood Species

Using Stress Wave Based Technology for Wood Material Nondestructive Testing

Predicted and Experimental Bending Behaviour of Glulam Bonded by RPF Adhesive

Static Method and Stress Wave Nondestructive Testing Study on Modulus of Elasticity of Wood

Characterizing Mechanical Properties of Layered Engineered Wood Using Guided Waves and Genetic Algorithm

A novel identification method for obtaining bending moment–curvature relations of wood stems based on digital image correlation and SDOF analysis

Experimental Study on the Flexure Property of Bamboo-Wood-gfrp Sandwich Beams

Optimization of measurement and calculation methods for viscoelastic creep strain and mechanical adsorption creep strain during conventional drying process of Pinus sylvestris

Experimental study on the flexural behaviour of engineered wood composite beams

Novel fiber Bragg Grating-based strain gauges for monitoring dynamic responses of Celtis sinensis under typhoon conditions