Abstract:Reliable non-destructive testing (NDT) ultrasound systems for timber composite structures require quantitative understanding of the propagation of ultrasound beams in wood. A finite-difference time-domain (FDTD) model is described, which incorporates local anisotropy variations of stiffness, damping and density in timber elements. The propagation of pulsed air-coupled ultrasound (ACU) beams in normal and slanted incidence configurations is reproduced by direct definition of material properties (gas, solid) at each model pixel. First, the model was quantitatively validated against analytical derivations. Time-varying wavefronts in unbounded timber with curved growth rings were accurately reproduced, as well as the acoustic properties (velocity, attenuation, beam skewing) of ACU beams transmitted through timber lamellas. An experimental sound field imaging (SFI) setup was implemented at NDT frequencies (120 kHz), which for specific beam incidence positions allows spatially resolved ACU field characterization at the receiver side. The good agreement of experimental and modeled beam shifts across timber laminates allowed extrapolation of the inner propagation paths. The modeling base is an orthotropic stiffness dataset for the desired wood species. In cross-grain planes, beam skewing leads to position-dependent wave paths. They are well-described in terms of the growth ring curvature, which is obtained by visual observation of the laminate. Extraordinary refraction phenomena were observed, which lead to well-collimated quasi-shear wave coupling at grazing beam incidence angles. The anisotropic damping in cross-grain planes is satisfactorily explained in terms of the known anisotropic stiffness dataset and a constant loss tangent. The incorporation of high-resolution density maps (X-ray computed tomography) provided insight into ultrasound scattering effects in the layered growth ring structure. Finally, the combined potential of the FDTD model and the SFI setup for material property and defect inversion in anisotropic materials was demonstrated. A portable SFI demonstrator was implemented with a multi-sensor MEMs receiver array that captures and compensates for variable wave propagation paths in glued laminated timber, and improves the imaging of lamination defects.

Using Stress Wave Based Technology for Wood Material Nondestructive Testing

Research on stress wave wood nondestructive testing technology

Static Method and Stress Wave Nondestructive Testing Study on Modulus of Elasticity of Wood

Theoretical and Experimental Study on Transient Measurement of Wood Thermal Properties

Crack Propagation And Fracture Process Zone (Fpz) Of Wood In The Longitudinal Direction Determined Using Digital Image Correlation (Dic) Technique

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Preliminary Study on Detection of Wood Structure Defects and Evaluation of Residual Elastic Modulus

A nondestructive guided wave propagation method for the characterization of moisture-dependent viscoelastic properties of wood materials

The Study of Wood Knots Using Acoustic Nondestructive Testing Methods.

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing

Acoustoelastic Guided and Surface Waves in Waveguides with Focus on Non-Destructive Testing and Structural Health Monitoring Applications —A Review of Recent Studies

Ultrasonic Measurement of Stress Considering Strain Effect

Experimental Study of the Effect of Internal Defects on Stress Waves during Automated Fiber Placement

Non-destructive mapping of stress, strain and stiffness of thin elastically deformed materials

Prediction Moisture Content and Strength of Wood Using Free-Space Microwave Transmission Line NDT

Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood

A novel constitutive model for the porosity related super-large deformation and anisotropic behavior of wood under perpendicular to grain compression

Non-destructive evaluation of non-uniform stress fields and subsurface stress gradients using ultrasonic waves

Comparison and parametric study of characteristics of eleven types of anisotropic woods based on the behaviour of Lamb wave propagation

Effect of wood anisotropy in ultrasonic wave propagation: A ray-tracing approach

Theoretical Analysis of Longitudinal Wave Attenuation in a Stressed Rock With Variable Cross-Section